{"id":{"repo_id":"cambridge","oai_identifier":"oai:www.repository.cam.ac.uk:1810/268222"},"canonical_url":"https://search.dev.ndltd.org/etd/cambridge/oai:www.repository.cam.ac.uk:1810/268222","repository":{"repo_id":"cambridge","name":"Cambridge University","base_url":"https://api.repository.cam.ac.uk/server/oai/request"},"display":{"title":"THERMOELECTRIC ENERGY HARVESTING IN DISPLAYS","abstract":"The development of a complete thermoelectric generator and its application on a display polarizer film was successfully accomplished in this thesis. A systematic study of the prospective thermoelectric materials, PEDOT:PSS-based and ${ZnON}$, used for the present application is presented. To the best of our knowledge, this is the first exploration of the thermoelectric parameters of ${ZnON}$ reported here. Thin-film deposition of these materials was performed via both solution- and vacuum-based techniques. In addition, certain doping mechanisms were tested in an attempt to further understand the correlation between electrical conductivity and Seebeck coefficient. A maximum power factor of $42{\\mu}Wm^{-1}K^{-2}$ was achieved for the PEDOT:PSS-based thin film at room temperature. It was initially doped via 5vol% of DMSO and sequentially treated with ethylene glycol. Specifically, its electrical conductivity displayed a 2-fold increase after EG treatment, reaching a value of about 1632 Scm$^{-1}$. Systematic studies performed on the association between thin-film thickness and its Seebeck coefficient shows a decrease in the latter as the number of multilayers printed increases. Among the different $O_{2}/N_{2}$ ratios that were tested for ${ZnON}$ thin films, a maximum power factor value of 163${\\mu}Wm^{-1}K{-2}$ was achieved with the lowest $O_{2}$ flow rate configuration. In contrast to PEDOT:PSS-based thin films, the ${ZnON}$ displayed the opposite effect on the relation of the Seebeck coefficient with respect to thin-film thickness. Furthermore, a heterostructure was also developed by implementing ${ZnO}$ nanowires into the ${ZnON}$ thin film. ${ZnO}$ nanowires have been fabricated through the hydrothermal method on inkjet-printed patterns of zinc acetate dihydrate. It has been demonstrated that with the right inkjet-printing parameters and substrate temperature, ${ZnO}$ nanowires can be effortlessly fabricated in accordance with the desired pattern variations under low temperature and mild conditions. Finally, a complete device of the thermoelectric generator was fabricated using the above materials and a special set-up developed in order to test the device on the polarizer. The power output achieved from a 1-thermoelectric couple under normal backlight illumination and ambient conditions was 23pW. Overall, it is thought that the particular design and proof of concept presented here can be the basis of a prospective energy harvesting scheme via thermoelectrics in future display-based handheld devices.","abstract_html":"The development of a complete thermoelectric generator and its application on a display polarizer film was successfully accomplished in this thesis. A systematic study of the prospective thermoelectric materials, PEDOT:PSS-based and ${ZnON}$, used for the present application is presented. To the best of our knowledge, this is the first exploration of the thermoelectric parameters of ${ZnON}$ reported here. Thin-film deposition of these materials was performed via both solution- and vacuum-based techniques. In addition, certain doping mechanisms were tested in an attempt to further understand the correlation between electrical conductivity and Seebeck coefficient. A maximum power factor of <span class=\"etd-inline-math\">42{&mu;}Wm<sup>-1</sup>K<sup>-2</sup></span> was achieved for the PEDOT:PSS-based thin film at room temperature. It was initially doped via 5vol% of DMSO and sequentially treated with ethylene glycol. Specifically, its electrical conductivity displayed a 2-fold increase after EG treatment, reaching a value of about 1632 Scm<span class=\"etd-inline-math\"><sup>-1</sup></span>. Systematic studies performed on the association between thin-film thickness and its Seebeck coefficient shows a decrease in the latter as the number of multilayers printed increases. Among the different <span class=\"etd-inline-math\">O<sub>2</sub>/N<sub>2</sub></span> ratios that were tested for ${ZnON}$ thin films, a maximum power factor value of 163<span class=\"etd-inline-math\">{&mu;}Wm<sup>-1</sup>K{-2}</span> was achieved with the lowest <span class=\"etd-inline-math\">O<sub>2</sub></span> flow rate configuration. In contrast to PEDOT:PSS-based thin films, the ${ZnON}$ displayed the opposite effect on the relation of the Seebeck coefficient with respect to thin-film thickness. Furthermore, a heterostructure was also developed by implementing ${ZnO}$ nanowires into the ${ZnON}$ thin film. ${ZnO}$ nanowires have been fabricated through the hydrothermal method on inkjet-printed patterns of zinc acetate dihydrate. It has been demonstrated that with the right inkjet-printing parameters and substrate temperature, ${ZnO}$ nanowires can be effortlessly fabricated in accordance with the desired pattern variations under low temperature and mild conditions. Finally, a complete device of the thermoelectric generator was fabricated using the above materials and a special set-up developed in order to test the device on the polarizer. The power output achieved from a 1-thermoelectric couple under normal backlight illumination and ambient conditions was 23pW. Overall, it is thought that the particular design and proof of concept presented here can be the basis of a prospective energy harvesting scheme via thermoelectrics in future display-based handheld devices.","abstract_has_math":true,"creators":["Tsangarides, Constantinos"],"institution":"University of Cambridge","degree_name":"Doctor of Philosophy (PhD)","degree_level":"Doctoral","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":["Nathan, Arokia"],"committee_chairs":[],"committee_members":[],"year":2017,"date_issued":"2017-11-01","date_published":"2017-11-01","updated_at":"2026-07-22T22:24:17Z","subjects":["thermoelectrics","polarizer","energy harvesting","inkjet-printed","organic","ZnON","PEDOT:PSS","displays","seebeck coefficient"],"languages":["en"],"rights":[],"rights_urls":["https://apollo8-f-pro.lib.cam.ac.uk/bitstreams/8d70a43a-7f3e-42cc-872e-0cabbdc6e98b/download","https://www.rioxx.net/licenses/all-rights-reserved/"],"identifier_entries":[]},"links":{"outbound_url":"https://doi.org/10.17863/CAM.14423","outbound_label":"DOI","outbound_source":"dc:identifier.doi"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.advisor","label":"Advisor","values":["Nathan, Arokia"]},{"key":"dc:contributor.sponsor","label":"Sponsor","values":["EPSRC (IPES)"]},{"key":"dc:creator","label":"Author","values":["Tsangarides, Constantinos"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date.issued","label":"Date","values":["2017-11-01"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Cambridge"]},{"key":"dc:relation.isreferencedby.uri","label":"Dc Relation Isreferencedby URI","values":["https://www.repository.cam.ac.uk/handle/1810/268222"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["Doctoral"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["Doctor of Philosophy (PhD)"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["thermoelectrics","polarizer","energy harvesting","inkjet-printed","organic","ZnON","PEDOT:PSS","displays","seebeck coefficient"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language","label":"Dc Language","values":["en"]},{"key":"dc:rights","label":"Dc Rights","values":["https://apollo8-f-pro.lib.cam.ac.uk/bitstreams/8d70a43a-7f3e-42cc-872e-0cabbdc6e98b/download","https://www.rioxx.net/licenses/all-rights-reserved/"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.doi","label":"DOI","values":["10.17863/CAM.14423"]},{"key":"dc:identifier.uri","label":"Identifier URI","values":["https://apollo8-f-pro.lib.cam.ac.uk/bitstreams/91928417-1c50-4b97-8d4c-5e69e1e39a9f/download"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["The development of a complete thermoelectric generator and its application on a display polarizer film was successfully accomplished in this thesis. A systematic study of the prospective thermoelectric materials, PEDOT:PSS-based and ${ZnON}$, used for the present application is presented. To the best of our knowledge, this is the first exploration of the thermoelectric parameters of ${ZnON}$ reported here. Thin-film deposition of these materials was performed via both solution- and vacuum-based techniques. In addition, certain doping mechanisms were tested in an attempt to further understand the correlation between electrical conductivity and Seebeck coefficient. A maximum power factor of $42{\\mu}Wm^{-1}K^{-2}$ was achieved for the PEDOT:PSS-based thin film at room temperature. It was initially doped via 5vol% of DMSO and sequentially treated with ethylene glycol. Specifically, its electrical conductivity displayed a 2-fold increase after EG treatment, reaching a value of about 1632 Scm$^{-1}$. Systematic studies performed on the association between thin-film thickness and its Seebeck coefficient shows a decrease in the latter as the number of multilayers printed increases. Among the different $O_{2}/N_{2}$ ratios that were tested for ${ZnON}$ thin films, a maximum power factor value of 163${\\mu}Wm^{-1}K{-2}$ was achieved with the lowest $O_{2}$ flow rate configuration. In contrast to PEDOT:PSS-based thin films, the ${ZnON}$ displayed the opposite effect on the relation of the Seebeck coefficient with respect to thin-film thickness. Furthermore, a heterostructure was also developed by implementing ${ZnO}$ nanowires into the ${ZnON}$ thin film. ${ZnO}$ nanowires have been fabricated through the hydrothermal method on inkjet-printed patterns of zinc acetate dihydrate. It has been demonstrated that with the right inkjet-printing parameters and substrate temperature, ${ZnO}$ nanowires can be effortlessly fabricated in accordance with the desired pattern variations under low temperature and mild conditions. Finally, a complete device of the thermoelectric generator was fabricated using the above materials and a special set-up developed in order to test the device on the polarizer. The power output achieved from a 1-thermoelectric couple under normal backlight illumination and ambient conditions was 23pW. Overall, it is thought that the particular design and proof of concept presented here can be the basis of a prospective energy harvesting scheme via thermoelectrics in future display-based handheld devices."]},{"key":"dc:format.checksum.md5","label":"Dc Format Checksum Md5","values":["87eda9de84448d1f82354d60eee3eb5f","49095254c86b16cc64b3e927f1e7dd8b"]},{"key":"dc:title","label":"Title","values":["THERMOELECTRIC ENERGY HARVESTING IN DISPLAYS"]}]}],"canonical_facts":{"dc:contributor.advisor":["Nathan, Arokia"],"dc:contributor.sponsor":["EPSRC (IPES)"],"dc:creator":["Tsangarides, Constantinos"],"dc:date.issued":["2017-11-01"],"dc:description.abstract":["The development of a complete thermoelectric generator and its application on a display polarizer film was successfully accomplished in this thesis. A systematic study of the prospective thermoelectric materials, PEDOT:PSS-based and ${ZnON}$, used for the present application is presented. To the best of our knowledge, this is the first exploration of the thermoelectric parameters of ${ZnON}$ reported here. Thin-film deposition of these materials was performed via both solution- and vacuum-based techniques. In addition, certain doping mechanisms were tested in an attempt to further understand the correlation between electrical conductivity and Seebeck coefficient. A maximum power factor of $42{\\mu}Wm^{-1}K^{-2}$ was achieved for the PEDOT:PSS-based thin film at room temperature. It was initially doped via 5vol% of DMSO and sequentially treated with ethylene glycol. Specifically, its electrical conductivity displayed a 2-fold increase after EG treatment, reaching a value of about 1632 Scm$^{-1}$. Systematic studies performed on the association between thin-film thickness and its Seebeck coefficient shows a decrease in the latter as the number of multilayers printed increases. Among the different $O_{2}/N_{2}$ ratios that were tested for ${ZnON}$ thin films, a maximum power factor value of 163${\\mu}Wm^{-1}K{-2}$ was achieved with the lowest $O_{2}$ flow rate configuration. In contrast to PEDOT:PSS-based thin films, the ${ZnON}$ displayed the opposite effect on the relation of the Seebeck coefficient with respect to thin-film thickness. Furthermore, a heterostructure was also developed by implementing ${ZnO}$ nanowires into the ${ZnON}$ thin film. ${ZnO}$ nanowires have been fabricated through the hydrothermal method on inkjet-printed patterns of zinc acetate dihydrate. It has been demonstrated that with the right inkjet-printing parameters and substrate temperature, ${ZnO}$ nanowires can be effortlessly fabricated in accordance with the desired pattern variations under low temperature and mild conditions. Finally, a complete device of the thermoelectric generator was fabricated using the above materials and a special set-up developed in order to test the device on the polarizer. The power output achieved from a 1-thermoelectric couple under normal backlight illumination and ambient conditions was 23pW. Overall, it is thought that the particular design and proof of concept presented here can be the basis of a prospective energy harvesting scheme via thermoelectrics in future display-based handheld devices."],"dc:format.checksum.md5":["87eda9de84448d1f82354d60eee3eb5f","49095254c86b16cc64b3e927f1e7dd8b"],"dc:identifier.doi":["10.17863/CAM.14423"],"dc:identifier.uri":["https://apollo8-f-pro.lib.cam.ac.uk/bitstreams/91928417-1c50-4b97-8d4c-5e69e1e39a9f/download"],"dc:language":["en"],"dc:publisher.institution":["University of Cambridge"],"dc:relation.isreferencedby.uri":["https://www.repository.cam.ac.uk/handle/1810/268222"],"dc:rights":["https://apollo8-f-pro.lib.cam.ac.uk/bitstreams/8d70a43a-7f3e-42cc-872e-0cabbdc6e98b/download","https://www.rioxx.net/licenses/all-rights-reserved/"],"dc:subject":["thermoelectrics","polarizer","energy harvesting","inkjet-printed","organic","ZnON","PEDOT:PSS","displays","seebeck coefficient"],"dc:title":["THERMOELECTRIC ENERGY HARVESTING IN DISPLAYS"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["Doctoral"],"dc:type.qualificationname":["Doctor of Philosophy (PhD)"]},"updated_at":"2026-07-22T22:24:17Z"}