Apoios em dente de vigas de concreto leve armado e protendido
type: CreativeWork
description: Tests on twenty half-joints (tooth-shaped end of a beam) of ten ligthtweight concrete beams were carried out. Five were reinforced concrete beams and five prestressed concrete beams. Five different joint reinforcement details were tested. The joints were reinforced so that reinforcement yielding failures and failures by crushing of the concrete strut could be studied. The prestress influence on the half-joint behavior was studied and tests showed that it is not important. A comparison of the half-joint stiffness for the different reinforcement details is shown. Studies on the methods of calculating the ultimate bearing reaction are presented. Many tests resulted in bond failures of the beam tensile reinforcement. Reinforcement procedures are suggested.
abstract: Tests on twenty half-joints (tooth-shaped end of a beam) of ten ligthtweight concrete beams were carried out. Five were reinforced concrete beams and five prestressed concrete beams. Five different joint reinforcement details were tested. The joints were reinforced so that reinforcement yielding failures and failures by crushing of the concrete strut could be studied. The prestress influence on the half-joint behavior was studied and tests showed that it is not important. A comparison of the half-joint stiffness for the different reinforcement details is shown. Studies on the methods of calculating the ultimate bearing reaction are presented. Many tests resulted in bond failures of the beam tensile reinforcement. Reinforcement procedures are suggested.
author: Silva, Augusto Cláudio Paiva e
language: por
keywords: Vigas pré-moldadas, Concreto armado
date published: 1974-08
date modified: 2026-07-24T01:15:49Z
provider: Brazil UERJ
publisher: Networked Digital Library of Theses and Dissertations
type: WebPage
source organization: Universidade Federal do Rio de Janeiro

PropertyValue
property ID: Handle
value: http://hdl.handle.net/11422/2651