Back to results

University of Bradford

Design and Implementation of Radio Frequency Power Feeding Networks for Antenna Array Applications: Simulation and Measurements of Multiport, Equal and Unequal, Fixed and Reconfigurable Radio Frequency Power Feeding Networks for Narrow and Ultra-Wideband Applications

Abstract

dc:description.abstract

Power dividers are vital components and widely used in radio technology, such as antenna arrays, power amplifiers, multiplexers and mixers. A good example is the well-known Wilkinson power divider with its distinctive feeding network characteristics. A comprehensive review indicated that limited research is carried out in the area of planar multiport and reconfigurable power dividers in terms of the power levels between output ports. The main objectives of this work were to develop a small size power divider, a planer multi-output ports power divider and a power divider with a reconfigurable power division ratio. These power dividers were designed to operate over either an ultra-wideband frequency (3.1-10.6 GHz) or WLAN bands (2.4 or 5.2 GHz). A novel multi-layered topology solved the complexity of interconnecting isolation resistors by introducing an additional layer below the ground layer. The prototype was fabricated and tested to validate the results. The measurements and simulation were in good agreement. Finally, a novel uniplanar power divider with reconfigurable output power level difference was developed. The configurability feature was achieved by tuning the quarter wave transformer using one varactor diode. The power divider was applied to improve a full duplex system cancellation performance at the receiver element caused by interference from in-site transmitting antennas. This study investigated fixed power dividers, multi-output power dividers and reconfigurable power dividers. The measurements validated by the simulation results and applications proved the designed power dividers could be used in practical applications.

Degree

thesis:*
Grantor dc:publisher.institution
University of Bradford

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Ali, Ammar H.A.
Advisor dc:contributor.advisor
  • Abd-Alhameed, Raed

Subjects

dc:subject × 10

Rights

dc:rights
Statement dc:rights
  • <a rel="license" href="http://creativecommons.org/licenses/by-nc-nd/3.0/"><img alt="Creative Commons License" style="border-width:0" src="http://i.creativecommons.org/l/by-nc-nd/3.0/88x31.png" /></a><br />The University of Bradford theses are licenced under a <a rel="license" href="http://creativecommons.org/licenses/by-nc-nd/3.0/">Creative Commons Licence</a>.
Language dc:language.iso
en

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/10454/17447
OAI identifier oai:identifier
oai:bradscholars.brad.ac.uk:10454/17447

Chain of custody

source
Harvested from
University of Bradford
Base URL
bradscholars.brad.ac.uk/oai/request
Last updated
2026-07-24
Source record
OAI-PMH GetRecord
citation

Ali, Ammar H.A.. Design and Implementation of Radio Frequency Power Feeding Networks for Antenna Array Applications: Simulation and Measurements of Multiport, Equal and Unequal, Fixed and Reconfigurable Radio Frequency Power Feeding Networks for Narrow and Ultra-Wideband Applications. University of Bradford, http://hdl.handle.net/10454/17447