Fault detection in rotating machines by vibration signal processing techniques

Machines with moving parts give rise to vibrations and consequently noise. The setting up and the status of each machine yield to a peculiar vibration signature. Therefore, a change in the vibration signature, due to a change in the machine state, can be used to detect incipient defects before they become critical. This is the goal of condition monitoring, in which the informations obtained from a machine signature are used in order to detect faults at an early stage. There are a large number of signal processing techniques that can be used in order to extract interesting information from a measured vibration signal. This study seeks to detect rotating machine defects using a range of techniques including synchronous time averaging, Hilbert transform-based demodulation, continuous wavelet transform, Wigner-Ville distribution and spectral correlation density function. The detection and the diagnostic capability of these techniques are discussed and compared on the basis of experimental results concerning gear tooth faults, i.e. fatigue crack at the tooth root and tooth spalls of different sizes, as well as assembly faults in diesel engine. Moreover, the sensitivity to fault severity is assessed by the application of these signal processing techniques to gear tooth faults of different sizes.

Grantor dc:publisher

Alma Mater Studiorum - Università di Bologna

Year dc:date

2008

Author dc:creator

• D'Elia, Gianluca <1980>

Contributors dc:contributor

• Dalpiaz, Giorgio

• ING-IND/13 Meccanica applicata alle macchine

Statement dc:rights

• info:eu-repo/semantics/openAccess

Language dc:language

en

Identifier

urn:nbn:it:unibo-921

OAI identifier oai:identifier

oai:amsdottorato.cib.unibo.it:952