{"id":{"repo_id":"birmingham","oai_identifier":"oai:etheses.bham.ac.uk:212"},"canonical_url":"https://search.dev.ndltd.org/etd/birmingham/oai:etheses.bham.ac.uk:212","repository":{"repo_id":"birmingham","name":"University of Birmingham","base_url":"https://etheses.bham.ac.uk/cgi/oai2"},"display":{"title":"Application of microstructural texture parameters to diffusional and displacive transformation products","abstract":"The measurement of materials properties and the control of processing parameters is important for both materials development and quality control. Determination of these parameters is sometimes advantageous if done by means of microstructural characterisation as here additional information may be gained from the sample. These values, e.g. the grain size or the volume fraction of the present microconstituents, may allow the correlation with mechanical properties or processing properties. Unfortunately, the diffusional and displacive transformation products, martensite and bainite, exhibit very fine microstructures with a low contrast, so that conventional microstructural image analysis cannot be applied readily to distinguish these structures. As an alternative microstructural characterisation technique texture analysis based on Haralick parameters calculated from second order grey value statistics was successfully applied. It has been shown that the analysis of large sample areas can be done automatically enabling the correlation of the texture data with the respective local microhardness using a neural network. The analysis is limited due to the dependence of the texture parameters on preparation and imaging conditions. A more detailed understanding of the individual Haralick parameters will be the basis to extend the method to a correlation with other properties of the sample that may be not easily accessible by physical testing, such as toughness.","abstract_html":"The measurement of materials properties and the control of processing parameters is important for both materials development and quality control. Determination of these parameters is sometimes advantageous if done by means of microstructural characterisation as here additional information may be gained from the sample. These values, e.g. the grain size or the volume fraction of the present microconstituents, may allow the correlation with mechanical properties or processing properties. Unfortunately, the diffusional and displacive transformation products, martensite and bainite, exhibit very fine microstructures with a low contrast, so that conventional microstructural image analysis cannot be applied readily to distinguish these structures. As an alternative microstructural characterisation technique texture analysis based on Haralick parameters calculated from second order grey value statistics was successfully applied. It has been shown that the analysis of large sample areas can be done automatically enabling the correlation of the texture data with the respective local microhardness using a neural network. The analysis is limited due to the dependence of the texture parameters on preparation and imaging conditions. A more detailed understanding of the individual Haralick parameters will be the basis to extend the method to a correlation with other properties of the sample that may be not easily accessible by physical testing, such as toughness.","abstract_has_math":false,"creators":["Fuchs, Alexander"],"institution":"University of Birmingham","degree_name":"d_ph","degree_level":"d_ph","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2005,"date_issued":"2005-12","date_published":"2005-12","updated_at":"2026-07-24T01:10:46Z","subjects":["TN Mining engineering. Metallurgy"],"languages":[],"rights":[],"rights_urls":[],"identifier_entries":[]},"links":{"outbound_url":"http://etheses.bham.ac.uk//id/eprint/212/2/Decl_IS_Fuchs05PhD.jpg","outbound_label":"Repository record","outbound_source":"dc:identifier.uri"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.sponsor","label":"Sponsor","values":["na"]},{"key":"dc:creator","label":"Author","values":["Fuchs, Alexander"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2005-12-09"]},{"key":"dc:date.issued","label":"Date","values":["2005-12"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["School of Engineering","Metallurgy and Materials Science"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Birmingham"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["http://etheses.bham.ac.uk//id/eprint/212/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["d_ph"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["d_ph"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["TN Mining engineering. Metallurgy"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://etheses.bham.ac.uk//id/eprint/212/1/Fuchs05PhD.pdf","http://etheses.bham.ac.uk//id/eprint/212/2/Decl_IS_Fuchs05PhD.jpg"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["The measurement of materials properties and the control of processing parameters is important for both materials development and quality control. Determination of these parameters is sometimes advantageous if done by means of microstructural characterisation as here additional information may be gained from the sample. These values, e.g. the grain size or the volume fraction of the present microconstituents, may allow the correlation with mechanical properties or processing properties. Unfortunately, the diffusional and displacive transformation products, martensite and bainite, exhibit very fine microstructures with a low contrast, so that conventional microstructural image analysis cannot be applied readily to distinguish these structures. As an alternative microstructural characterisation technique texture analysis based on Haralick parameters calculated from second order grey value statistics was successfully applied. It has been shown that the analysis of large sample areas can be done automatically enabling the correlation of the texture data with the respective local microhardness using a neural network. The analysis is limited due to the dependence of the texture parameters on preparation and imaging conditions. A more detailed understanding of the individual Haralick parameters will be the basis to extend the method to a correlation with other properties of the sample that may be not easily accessible by physical testing, such as toughness."]},{"key":"dc:format","label":"Dc Format","values":["application/pdf","image/jpeg"]},{"key":"dc:title","label":"Title","values":["Application of microstructural texture parameters to diffusional and displacive transformation products"]}]}],"canonical_facts":{"dc:contributor.sponsor":["na"],"dc:creator":["Fuchs, Alexander"],"dc:date":["2005-12-09"],"dc:date.issued":["2005-12"],"dc:description.abstract":["The measurement of materials properties and the control of processing parameters is important for both materials development and quality control. Determination of these parameters is sometimes advantageous if done by means of microstructural characterisation as here additional information may be gained from the sample. These values, e.g. the grain size or the volume fraction of the present microconstituents, may allow the correlation with mechanical properties or processing properties. Unfortunately, the diffusional and displacive transformation products, martensite and bainite, exhibit very fine microstructures with a low contrast, so that conventional microstructural image analysis cannot be applied readily to distinguish these structures. As an alternative microstructural characterisation technique texture analysis based on Haralick parameters calculated from second order grey value statistics was successfully applied. It has been shown that the analysis of large sample areas can be done automatically enabling the correlation of the texture data with the respective local microhardness using a neural network. The analysis is limited due to the dependence of the texture parameters on preparation and imaging conditions. A more detailed understanding of the individual Haralick parameters will be the basis to extend the method to a correlation with other properties of the sample that may be not easily accessible by physical testing, such as toughness."],"dc:format":["application/pdf","image/jpeg"],"dc:identifier.uri":["http://etheses.bham.ac.uk//id/eprint/212/1/Fuchs05PhD.pdf","http://etheses.bham.ac.uk//id/eprint/212/2/Decl_IS_Fuchs05PhD.jpg"],"dc:publisher.department":["School of Engineering","Metallurgy and Materials Science"],"dc:publisher.institution":["University of Birmingham"],"dc:relation.isreferencedby":["http://etheses.bham.ac.uk//id/eprint/212/"],"dc:subject":["TN Mining engineering. Metallurgy"],"dc:title":["Application of microstructural texture parameters to diffusional and displacive transformation products"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["d_ph"],"dc:type.qualificationname":["d_ph"]},"updated_at":"2026-07-24T01:10:46Z"}