Aerosol jet printing (AJP)—a direct-write, additive manufacturing technique—has emerged as the process of choice particularly for the fabrication of flexible and hybrid electronics. AJP has paved the way for high-resolution device fabrication with high placement accuracy, edge definition, and adhesion. In addition, AJP accommodates a broad range of ink viscosity, and allows for printing on non-planer surfaces. Despite the unique advantages and host of strategic applications, AJP is a highly unstable and complex process, prone to gradual drifts in machine behavior and deposited material. Hence, real-time monitoring and control of AJP process is a burgeoning need. In pursuit of this goal, the objectives of the work are, as follows: (i) In situ image acquisition from the traces/lines of printed electronic devices right after deposition. To realize this objective, the AJP experimental setup was instrumented with a high-resolution charge-coupled device (CCD) camera, mounted on a variable-magnification lens (in addition to the standard imaging system, already installed on the AJ printer). (ii) In situ image processing and quantification of the trace morphology. In this regard, several customized image processing algorithms were devised to quantify/extract various aspects of the trace morphology from online images. In addition, based on the concept of shape-from-shading (SfS), several other algorithms were introduced, allowing for not only reconstruction of the 3D profile of the AJ-printed electronic traces, but also quantification of 3D morphology traits, such as thickness, cross-sectional area, and surface roughness, among others. (iii) Development of a supervised multiple-input, single-output (MISO) machine learning model—based on sparse representation for classification (SRC)—with the aim to estimate the device functional properties (e.g., resistance) in near real-time with an accuracy of ≥ 90%. (iv) Forwarding a computational fluid dynamics (CFD) model to explain the underlying aerodynamic phenomena behind aerosol transport and deposition in AJP process, observed experimentally.
Overall, this doctoral dissertation paves the way for: (i) implementation of physics-based real-time monitoring and control of AJP process toward conformal material deposition and device fabrication; and (ii) optimal design of direct-write components, such as nozzles, deposition heads, virtual impactors, atomizers, etc.
","abstract_html":"<p>Aerosol jet printing (AJP)—a direct-write, additive manufacturing technique—has emerged as the process of choice particularly for the fabrication of flexible and hybrid electronics. AJP has paved the way for high-resolution device fabrication with high placement accuracy, edge definition, and adhesion. In addition, AJP accommodates a broad range of ink viscosity, and allows for printing on non-planer surfaces. Despite the unique advantages and host of strategic applications, AJP is a highly unstable and complex process, prone to gradual drifts in machine behavior and deposited material. Hence, real-time monitoring and control of AJP process is a burgeoning need. In pursuit of this goal, the objectives of the work are, as follows: (i) <em>In situ </em>image acquisition from the traces/lines of printed electronic devices right after deposition. To realize this objective, the AJP experimental setup was instrumented with a high-resolution charge-coupled device (CCD) camera, mounted on a variable-magnification lens (in addition to the standard imaging system, already installed on the AJ printer). (ii) <em>In situ </em>image processing and quantification of the trace morphology. In this regard, several customized image processing algorithms were devised to quantify/extract various aspects of the trace morphology from online images. In addition, based on the concept of shape-from-shading (SfS), several other algorithms were introduced, allowing for not only reconstruction of the 3D profile of the AJ-printed electronic traces, but also quantification of 3D morphology traits, such as thickness, cross-sectional area, and surface roughness, among others. (iii) Development of a supervised multiple-input, single-output (MISO) machine learning model—based on sparse representation for classification (SRC)—with the aim to estimate the device functional properties (e.g., resistance) in near real-time with an accuracy of ≥ 90%. (iv) Forwarding a computational fluid dynamics (CFD) model to explain the underlying aerodynamic phenomena behind aerosol transport and deposition in AJP process, observed experimentally.</p> <p>Overall, this doctoral dissertation paves the way for: (i) implementation of physics-based real-time monitoring and control of AJP process toward conformal material deposition and device fabrication; and (ii) optimal design of direct-write components, such as nozzles, deposition heads, virtual impactors, atomizers, etc.</p>","abstract_has_math":false,"creators":["Salary, Roozbeh (Ross)"],"institution":null,"degree_name":"Doctor of Philosophy (PhD)","degree_level":"Dissertation","degree_discipline":"Systems Science and Industrial Engineering","degree_department":null,"school":null,"contributors":["Dr. Mark D. Poliks"],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2018,"date_issued":"2018-07-01T07:00:00Z","date_published":"2018-07-01T07:00:00Z","updated_at":"2026-07-24T01:10:09Z","subjects":["Applied sciences","Advanced/additive manufacturing","Aerosol jet printing (AJP)","Computational fluid dynamics (CFD)","Flexible and hybrid electronics","Physics-based monitoring and control","Operations Research, Systems Engineering and Industrial Engineering"],"languages":[],"rights":[],"rights_urls":[],"identifier_entries":[]},"links":{"outbound_url":"https://orb.binghamton.edu/dissertation_and_theses/80","outbound_label":"Repository record","outbound_source":"dc:identifier"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor","label":"Contributor","values":["Dr. Mark D. Poliks"]},{"key":"dc:creator","label":"Author","values":["Salary, Roozbeh (Ross)"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"thesis:degree_discipline","label":"Discipline","values":["Systems Science and Industrial Engineering"]},{"key":"thesis:degree_level","label":"Degree Level","values":["Dissertation"]},{"key":"thesis:degree_name","label":"Degree Name","values":["Doctor of Philosophy (PhD)"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Applied sciences","Advanced/additive manufacturing","Aerosol jet printing (AJP)","Computational fluid dynamics (CFD)","Flexible and hybrid electronics","Physics-based monitoring and control","Operations Research, Systems Engineering and Industrial Engineering"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier","label":"Identifier","values":["https://orb.binghamton.edu/dissertation_and_theses/80"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Aerosol jet printing (AJP)—a direct-write, additive manufacturing technique—has emerged as the process of choice particularly for the fabrication of flexible and hybrid electronics. AJP has paved the way for high-resolution device fabrication with high placement accuracy, edge definition, and adhesion. In addition, AJP accommodates a broad range of ink viscosity, and allows for printing on non-planer surfaces. Despite the unique advantages and host of strategic applications, AJP is a highly unstable and complex process, prone to gradual drifts in machine behavior and deposited material. Hence, real-time monitoring and control of AJP process is a burgeoning need. In pursuit of this goal, the objectives of the work are, as follows: (i) In situ image acquisition from the traces/lines of printed electronic devices right after deposition. To realize this objective, the AJP experimental setup was instrumented with a high-resolution charge-coupled device (CCD) camera, mounted on a variable-magnification lens (in addition to the standard imaging system, already installed on the AJ printer). (ii) In situ image processing and quantification of the trace morphology. In this regard, several customized image processing algorithms were devised to quantify/extract various aspects of the trace morphology from online images. In addition, based on the concept of shape-from-shading (SfS), several other algorithms were introduced, allowing for not only reconstruction of the 3D profile of the AJ-printed electronic traces, but also quantification of 3D morphology traits, such as thickness, cross-sectional area, and surface roughness, among others. (iii) Development of a supervised multiple-input, single-output (MISO) machine learning model—based on sparse representation for classification (SRC)—with the aim to estimate the device functional properties (e.g., resistance) in near real-time with an accuracy of ≥ 90%. (iv) Forwarding a computational fluid dynamics (CFD) model to explain the underlying aerodynamic phenomena behind aerosol transport and deposition in AJP process, observed experimentally.
Overall, this doctoral dissertation paves the way for: (i) implementation of physics-based real-time monitoring and control of AJP process toward conformal material deposition and device fabrication; and (ii) optimal design of direct-write components, such as nozzles, deposition heads, virtual impactors, atomizers, etc.
"]},{"key":"dc:title","label":"Title","values":["Computational fluid dynamics modeling and in situ physics-based monitoring of aerosol jet printing toward functional assurance of additively-manufactured, flexible and hybrid electronics"]}]}],"canonical_facts":{"dc:contributor":["Dr. Mark D. Poliks"],"dc:creator":["Salary, Roozbeh (Ross)"],"dc:description.abstract":["Aerosol jet printing (AJP)—a direct-write, additive manufacturing technique—has emerged as the process of choice particularly for the fabrication of flexible and hybrid electronics. AJP has paved the way for high-resolution device fabrication with high placement accuracy, edge definition, and adhesion. In addition, AJP accommodates a broad range of ink viscosity, and allows for printing on non-planer surfaces. Despite the unique advantages and host of strategic applications, AJP is a highly unstable and complex process, prone to gradual drifts in machine behavior and deposited material. Hence, real-time monitoring and control of AJP process is a burgeoning need. In pursuit of this goal, the objectives of the work are, as follows: (i) In situ image acquisition from the traces/lines of printed electronic devices right after deposition. To realize this objective, the AJP experimental setup was instrumented with a high-resolution charge-coupled device (CCD) camera, mounted on a variable-magnification lens (in addition to the standard imaging system, already installed on the AJ printer). (ii) In situ image processing and quantification of the trace morphology. In this regard, several customized image processing algorithms were devised to quantify/extract various aspects of the trace morphology from online images. In addition, based on the concept of shape-from-shading (SfS), several other algorithms were introduced, allowing for not only reconstruction of the 3D profile of the AJ-printed electronic traces, but also quantification of 3D morphology traits, such as thickness, cross-sectional area, and surface roughness, among others. (iii) Development of a supervised multiple-input, single-output (MISO) machine learning model—based on sparse representation for classification (SRC)—with the aim to estimate the device functional properties (e.g., resistance) in near real-time with an accuracy of ≥ 90%. (iv) Forwarding a computational fluid dynamics (CFD) model to explain the underlying aerodynamic phenomena behind aerosol transport and deposition in AJP process, observed experimentally.
Overall, this doctoral dissertation paves the way for: (i) implementation of physics-based real-time monitoring and control of AJP process toward conformal material deposition and device fabrication; and (ii) optimal design of direct-write components, such as nozzles, deposition heads, virtual impactors, atomizers, etc.
"],"dc:identifier":["https://orb.binghamton.edu/dissertation_and_theses/80"],"dc:subject":["Applied sciences","Advanced/additive manufacturing","Aerosol jet printing (AJP)","Computational fluid dynamics (CFD)","Flexible and hybrid electronics","Physics-based monitoring and control","Operations Research, Systems Engineering and Industrial Engineering"],"dc:title":["Computational fluid dynamics modeling and in situ physics-based monitoring of aerosol jet printing toward functional assurance of additively-manufactured, flexible and hybrid electronics"],"thesis:degree_discipline":["Systems Science and Industrial Engineering"],"thesis:degree_level":["Dissertation"],"thesis:degree_name":["Doctor of Philosophy (PhD)"]},"updated_at":"2026-07-24T01:10:09Z"}