Flow and transport processes as affected by tillage management under monsoonal conditions in South Korea

A sustainable agriculture, which provides enough yields to satisfy the food demand and minimizes the impacts on ecosystem services such as provision of high water quality, is challenging especially in monsoon regions. In this thesis, plastic mulched ridge cultivation (RTpm) under monsoonal conditions and its impact on flow processes and nitrate transport was investigated. On hillslopes, we monitored surface and subsurface flow processes in four plastic mulched potato fields using a network of tensiometers, FDR sensors, runoff collectors and flow dividers as well as Brilliant Blue FCF tracer experiments. The obtained datasets were used to calibrate the process-based models HYDRUS 2/3D and EROSION 3D in order to quantify drainage water fluxes, surface runoff and erosion rates of RTpm compared to ridge tillage without coverage (RT) and conventional flat tillage (CT). In a flat terrain, N fate under fertilizer rates at 50, 150, 250 and 350 kg NO3− ha−1 was investigated in a plastic mulched radish field using suction lysimeters, tensiometers and a 15N tracer experiment. We used datasets of nitrate concentrations and matric potentials to calibrate a water flow and solute transport model using the numerical code HydroGeoSphere. RTpm affects soil water dynamics dominantly during dry periods, when ridge soil was drier compared to furrow soil caused by the protective plastic coverage and root water uptake in ridges. Hence, pressure head gradients induced lateral flow from furrows to ridges. Under monsoonal conditions, soil was fully saturated and down slope lateral flow occurred in the coarse textured topsoil. The dye tracer experiments showed that matrix flow dominated in the sandy topsoil. Lateral funnel flow above the tillage pan was the prominent preferential flow path. Unexpectedly, macropore flow in deeper soil horizons was not detected. The field and modeling studies revealed that surface runoff was substantially increased under RTpm compared to RT and CT. However, the field topography primarily controlled surface runoff and erosion rates. The concavity of the field led to flow accumulation and high erosion losses in the center of the field, while a convex shape resulted in less soil erosion. NO3− leaching was found to be the prominent pathway especially during the early season. Furthermore, the biomass production did not significantly differ between NO3− fertilizer rates of 150 to 350 kg ha−1. Hence, we recommend NO3− fertilizer application of 150 kg ha−1, a better fertilizer placement and split applications. We simulated whether the given recommendations on fertilizer best management practices (FBMPs) decreased NO3− leaching amounts. Compared to RT under conventional fertilization in ridges and furrows, the simulations showed that NO3− leaching can be considerably reduced up to 82% by combining RTpm, fertilizer placement only in ridges and split applications with a total fertilizer NO3− amount of 150 kg ha−1. Based on these findings, the impact of RTpm on flow and transport processes has to be evaluated differently depending on terrain complexity. In a flat terrain, where surface runoff processes are absent or minimal, RTpm has several advantages. Beside functions such as weed control, and earlier plant emergence due to higher temperatures, plastic mulching decreases drainage water and NO3− leaching. Thus, RTpm enhances nutrient retention below the plastic mulch and reduces NO3− groundwater contamination risk. On slopes, where precipitation contributes substantially to surface runoff, RTpm even increases runoff, soil erosion and surface leaching of agrochemicals into aquatic systems. This thesis provides several recommendations, aiming to minimize environmental impacts and to decrease costs of fertilizer and herbicide inputs. To reduce surface runoff and soil erosion at sloped fields, we suggest applying perforated plastic mulch and a ridge configuration following contours of the field. Furthermore, we recommend omitting application of herbicides in furrows to allow weed growth, which slows down runoff processes. These suggestions would increase infiltration and subsurface flow processes automatically become more important. However, absent preferential flow to deeper soil layers indicated a low groundwater contamination risk. Since funnel flow above the tillage pan was found to be the most important preferential flow path, we propose the establishment of riparian buffer zones. This would also help to reduce the discharge of sediments and fertilizers via surface runoff into the streams. Finally, FBMPs such as fertilizer placement only in ridges and split applications were found to decrease nitrate leaching considerably. Hence, we suggest applying FBMPs with impermeable plastic mulch in flat terrain, while on hill slopes FBMPs should be applied with perforated plastic mulch. To reduce the leaching and erosion risk after harvest when the plastic mulched ridges are removed, we recommend cultivating cover crops.

Level thesis:degree_level

thesis.doctoral

Grantor dc:publisher

Universität Bayreuth

Year

2013

Author dc:creator

• Ruidisch, Marianne

Contributors dc:contributor

• Huwe, Bernd

Repository record source_url

https://epub.uni-bayreuth.de/id/eprint/160/

OAI identifier oai:identifier

oai:epub.uni-bayreuth.de:160