Positioning In Indoor Environments Based on INS and RF Sensor Fusion

The past few years have witnessed an increasing demand for positioning applications in indoor environments. Several technologies have been employed to develop systems which can efficiently perform the positioning task in such environments. However, most of the available systems are either large and expensive or insufficiently accurate to be reliable for some of the critical applications. This thesis describes the development of an indoor positioning system which can provide portability, minimum cost and sufficient accuracy. Two of low cost sensor technologies have been utilised in this research; Inertial Navigation Systems (INS) and a positioning system based on the Bluetooth technology. The development of final system has been targeted by first optimizing the performance of each individual system using a series of proposed methods. Fusion of the measurements from the optimised systems in then performed using suitable fusion filters, such as Kalman and particle filter. Considering the INS based applications, a gravity compensation method is used for filtering the gravitational changes which corrupt the outputs of the accelerometers. A different method is then applied to automatically reset the INS errors found when obtaining the distance travelled by moving objects based on the measured accelerations. In enhancing the performance of the Bluetooth positioning system, a method has been developed to dynamically calibrate the radio frequency (RF) signal parameters to adapt for the environmental changes. In each of the developed methods, necessary verifications and testing have been done through simulations as well as using experimental setup designed for each of the sensor technologies. Final results show that the INS errors have been significantly reduced using the proposed resetting method which also extended the operational time from few seconds to several minutes. The performance of the Bluetooth based system has achieved positioning error of less than 1.5 metres using the proposed dynamic calibration method. Testing results of the fusion of the two optimised systems showed that the positioning error of the final system can be reduced to less than 1 metre when using either of the fusion filters. Furthermore, the fusion of the INS have demonstrated a positive impact in lowering the number of the Bluetooth reference nodes needed for achieving an adequate indoor positioning accuracy, hence cutting the overall cost when deploying the final system in real indoor applications.

Name thesis:degree_name

PhD

Level thesis:degree_level

Doctoral

Discipline thesis:degree_discipline

Electrical and Electronic Engineering

Grantor dc:publisher

ResearchSpace@Auckland

Year dc:date.issued

2011

Author dc:creator

• Akeila, Ehad

Advisors dc:contributor.advisor

• Salcic, Z
• Swain, A

Statement dc:rights

• Items in ResearchSpace are protected by copyright, with all rights reserved, unless otherwise indicated. Previously published items are made available in accordance with the copyright policy of the publisher.

Licence dc:rights.uri

• https://researchspace.auckland.ac.nz/docs/uoa-docs/rights.htm

Handle dc:identifier.uri

https://hdl.handle.net/2292/6873

OAI identifier oai:identifier

oai:researchspace.auckland.ac.nz:2292/6873