Back to results

University of Arkansas

Validation of CFD Tornado Pressure on Building and Wind Field with TTU Vortex Chamber Measurements

Abstract

dc:description.abstract

<p>Structural failure of low-rise buildings is the root cause of higher number of casualties, death tolls and economic losses at the place of occurrence of tornadoes. Proper design of low-rise buildings in tornado-prone areas require accurate estimation of tornado-induced wind loads; however, exhaustive research to estimate the wind loads reliably on buildings during tornadic events is still lacking. Several studies have been carried out to investigate the magnitude of forces induced by tornado winds on buildings from experimental as well as computational side. However, the wind pressures obtained on the building from different experimental studies have shown significant variation from one study to another. Similarly, the wind pressures on the building from CFD simulation of tornado vortex often lacks comparison and/or validation with experimental data. Even the modeling of CFD tornado chamber and CFD flow validation is fraught with several challenges such as requirements of high-performance (or supercomputing) resources and lack of guidelines for validation of wind field of tornado vortex from CFD model. </p> <p>Thus, in this work, a simple yet an effective CFD tornado simulator model is developed, which provides comparable results with experiment without the necessity of supercomputing resources. This work also identifies and proposes four important features of tornado vortex (i.e., touchdown swirl ratio, core radius, the maximum tangential velocity & the elevation of maximum tangential velocity) including the ground pressure profile for validation of wind field obtained from CFD model. A comparative analysis of the four important vortex features from different tornado chambers and different work of literature is also presented. Lastly, the pressures induced by tornado vortex from CFD model on the building is validated with TTU experimental datasets. Furthermore, a detailed analysis on the effect of size of building, flow structure and Reynolds number of vortex on the induced wind pressures on the building is also presented. </p>

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy in Engineering (PhD)
Level thesis:degree_level
Dissertation
Year dc:date.available
2022

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Verma, Sumit
Advisor dc:contributor.advisor
  • Selvam, R. Panneer
Contributors dc:contributor
  • Hale, W. Micah
  • Heymsfield, Ernest

Subjects

dc:subject × 10

Identifiers

dc:identifier.*
Repository record dc:identifier
https://scholarworks.uark.edu/etd/4516
OAI identifier oai:identifier
oai:scholarworks.uark.edu:etd-6066

Chain of custody

source
Harvested from
University of Arkansas
Base URL
scholarworks.uark.edu/do/oai/
Last updated
2026-07-24
Source record
OAI-PMH GetRecord
citation

Verma, Sumit. Validation of CFD Tornado Pressure on Building and Wind Field with TTU Vortex Chamber Measurements. Dissertation thesis, 2022. https://scholarworks.uark.edu/etd/4516