Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 5 of 5 for “"resin-coated"”.
-
An investigation of the induction heating characteristics of powdered susceptors dispersed in a non-conducting medium
… dispersed in silica sand which had been coated with thermosetting resin. The powdered susceptor particles in the mixture were heated by the field of an induction coil, consequently heating the resin coated sand and bonding the sand grains together.</p> <p>It was found that the type, …
-
Experimental characterization of the Barree and Conway (2004) single-phase non-Darcy flow model in various hydraulic fracturing sands
… psi on five sizes and types of fracturing sand (resin coated and uncoated) and crushed turquoise. Three flow cells were built from each granular material. Each cell was designated for a single-phase flow. In addition, fracturing sand characterization such as sieve analysis and sphericity and …
-
Hydraulic fracturing design for horizontal wells in the Bakken formation, Williston Basin
… by crosslinked gel together with ceramic or resin-coated sand would guarantee that most proppants would stay within the Bakken Formation. The results from this research also suggest that in a Bakken well with a long lateral length (e.g. 10,000 ft), a fracturing strategy that leads to a …
-
Influence of Temperature and Time on Nutrient Release Patterns of Osmocote Plus™, Nutricote™, and Polyon™ Controlled-Release Fertilizers
Polymer-coated controlled-release fertilizers (PCFs) are the most widely used class of fertilizers in the production of container-grown nursery plants. Nutrient release from PCFs is primarily influenced by temperature. The objective of this study was to determine the influences of temperature and …
-
Bond exchange reactions in high temperature thermoset polymers
… coating. Laminates were bonded to plies of coated Al 7075. The bonded laminates were mechanically characterized via lap shear, 4-point bend, short beam shear, and Mode I fracture designed to examine strength and failure at the metal/composite bondline. Results showed that the failure mode …