Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 47 for “"liquid jet"”.
-
Mass Transfer Characteristics of the Submerged Liquid Jet
Mass transfer characteristics of a liquid jet in a liquid continuous phase have been studied using a captured jet technique. A vertical jet was formed at the centre of a glass sided square-section cell of 102mm x 102mm x 305mm which held the stationary continuous phase. The technique allowed the …
-
Interfacial Resistance: Diffusion Into a Laminar Liquid-Liquid Jet
Made available in DSpace on 2015-05-12T21:38:34Z (GMT). No. of bitstreams: 2 license.txt: 4848 bytes, checksum: 96035ab3f5e1c23cc7138a224ce498bd (MD5) 6507129.PDF: 3253182 bytes, checksum: 20a2961ab2b31cb3f8b9252f3555b043 (MD5) Previous issue date: 1965
-
The stability and control of curved liquid jet break-up
… into the break-up dynamics of a curved liquid jet has been studied. A comprehensive review of previous works on straight and curved jet break-up is given, with a detailed comparison between experimental investigation and theoretical models, showing the full uses and limitations of the …
-
The stability and control of curved liquid jet break-up
… into the break-up dynamics of a curved liquid jet has been studied. A comprehensive review of previous works on straight and curved jet break-up is given, with a detailed comparison between experimental investigation and theoretical models, showing the full uses and limitations of the …
-
Experimental study of the hydrodynamics of an impinging liquid jet
Thesis (B.S.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1989.
-
An experimental investigation of liquid jet impingement heat transfer theories
Thesis (B.S.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1990.
-
The effect of liquid characteristics upon the breakup of a liquid jet
Thesis (B.S.)--Massachusetts Institute of Technology, Dept. of Chemical Engineering, 1976.
-
Spatio-temporal Characteristics of a Spray from a Liquid Jet in Crossflow
A liquid jet in a crossflow is often used to as a fuel injection method for combustion systems. Parameters such as penetration and core trajectory are used as characterization for the spray and specification of design criteria for combustor geometry. In addition to penetration and core trajectory, …
-
Technical, economic, and environmental assessment of liquid jet fuel production on aircraft carriers
… and subject to changes in markets price for liquid fuels. This work is a first order assessment of the technical feasibility and characteristics of technologies to produce fuel onboard aircraft carriers. The plant is evaluated for three technology pathways: Alkaline electrolysis and the …
-
Traverse injection of a particle-laden liquid jet into a supersonic air stream
… of the transverse injection of a particle laden liquid jet into a supersonic air stream was conducted. Five micron diameter silicon dioxide particles with a specific gravity of 2.35 were suspended in water and injected across a Mach 3.0 air stream. A stagnation pressure of 4.2 atm. and a …
-
Numerical Simulation of a Liquid Jet Atomization and Break-Up Using ANSYS-CFX 12.0
<p>Break-up and atomization characteristics of JetA liquid fuel were investigated numerically. The results have been compared to various experimental results to evaluate the accuracy of the numerical model. The CFD code ANSYS-CFX 12.0 was used to carry out the steady state analysis at different …
-
Modelling the behaviour of a stationary horizontal liquid jet impinging on a vertical wall
Predicting the flow patterns generated by liquid jets impinging on vertical surfaces is crucial for designing efficient industrial tank cleaning systems. The flow behaviour generated by a stationary horizontal water jet impinging on a vertical target surface (Perspex, glass or polypropylene) was …
-
Liquid jet impingement heat transfer and its potential applications at extremely high heat fluxes
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1992.
-
Microfluidics at high-intensity X-ray sources: from microflow chips to microfluidic liquid jet systems
… Microfluidics enables the precise control of liquids on the nanoliter scale. These very well defined flow conditions make this technology predestined for fundamental investigations at microfocused X-ray sources. With recent developments in synchrotron technology and with the advent of free …
-
A Study of Liquid Jet Penetration of Liquids with Interfacial Boiling of the Continuous Phase
Made available in DSpace on 2017-07-06T18:56:13Z (GMT). No. of bitstreams: 3 Schneider_Jeffrey_P_MS.pdf: 52990407 bytes, checksum: 325aba8ed028959437bd090d9d303fb9 (MD5) Schneider_Jeffrey_P_MS_ABS.pdf: 728875 bytes, checksum: 434bca97805fea99d98201d108b69eb4 (MD5) license.txt: 4813 bytes, checksum: …
-
A study of the effects of velocity profile development and polyethylene oxide addition on liquid jet stability
Massachusetts Institute of Technology. Dept. of Chemical Engineering. Thesis. 1967. B.S.
-
Digital holography for exploring instabilities and breakup of liquid jets in supersonic crossflows
Direct injection studies of liquid jets in supersonic crossflows (JICFs) are critical for understanding combustion in scramjet engines. Exploring these fluid dynamic interactions is not only an important step towards characterizing fundamental liquid breakup properties but also key for improving …
-
Distributions across the plume of transverse liquid and slurry jets in supersonic airflow
Liquid and slurry jets were injected through a circular orifice transverse to a M = 3.0 airflow. Mass samples of both jets were taken across the plume 30 injector diameters downstream. Pitot and static pressure surveys were taken across the liquid jet. These data allowed the calculation of …
-
Experimental Investigation of Jet Breakup at Low Weber Number
… investigation on the disintegration of circular liquid jets, ejected into a stagnant ambient atmosphere at low Weber number, is presented in this thesis. The process of breakup of the liquid jet was captured using a real-time image processing high-speed digital camera system. In order to …
-
Development of a 20-moment Polydisperse and Polykinetic Spray Model Coupled With a Surface Density Approach for the Modelling of the Dense and Disperse Liquid Spray Regimes
… for the modelling of both the dense and disperse liquid spray regimes. In this approach, a version of the Sigma-Y quasi-multiphase model is used for modelling of the primary atomization of the liquid jet/sheet in the dense spray regime while the 20-moment Anisotropic Gaussian (AG) moment closure …
Page 1 of 3