Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 263 for “"impingement"”.
-
Jet impingement on porous surfaces
… documenting the flow resulting from the normal impingement of planar and axisymmetric jets onto a porous surface. Six different porous surfaces with open area ratios of 23, 26, 31, 37, 44 and 54% (? = 0.23, 0.26, 0.31, 0.37, 0.44 and 0.54) were placed in low speed (usually 40m/s exit velocity) …
-
Flat Plate-Free Jet Impingement Studies
Made available in DSpace on 2014-12-09T18:12:23Z (GMT). No. of bitstreams: 1 6812127.pdf: 2401029 bytes, checksum: cf2a87216bd80e344ceacff1b11b1b0b (MD5) Previous issue date: 1968
-
Numerical Simulations and Studies on Round Jet Impingement, Twin Jet Impingement and Helicopter Rotor Blades Ground Effect
… The first part focused on single round jet impingement. The convention air jet impingement on ground surface was compared to air jet impingement on water surface in the range of Mach number from 0 to 0.3. Currently the studies on round jet impingement on water surface are very few. The goal …
-
Erosion of metals by solid particle impingement.
Thesis (B.S.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1971.
-
Spray forming, droplet microstructure and impingement behavior
Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 1996.
-
Heat Transfer to Arrays of Oscillating Impingement Jets
… will always limit operating temperatures. Impingement cooling jets have become a common way of cooling due to the high rates of heat transfer that can be achieved. However, previous research has shown that the interaction of impingement jets with cylinder wake can improve the intensity and …
-
Spray and Single Droplet Impingement on a Wall
… characteristics of spray and single droplet impingement are modeled. First a stochastic model based on the sampling of velocity and size distributions of secondary droplets is used to simulate impingement breakup. The numerical predictions are compared to experimental results yielding …
-
Operating characteristics of an impingement type dust separator,
Thesis: B.S., Massachusetts Institute of Technology, Department of Chemical Engineering, 1946
-
Active control of supersonic impingement tones using microjets
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2003.
-
Microjet impingement cooling of high power-density electronics
… the high heat transfer capability of microjet impingement was leveraged to bring cooling directly to the backside of the electronic device. Previous experimental studies characterized the effects of geometrical factors, such as diameter, pitch, and standoff, on heat transfer performance. …
-
Jet impingement boiling heat transfer at low coiling temperatures
The production of advanced high strength steels (AHSS) for use in the automotive and construction industries requires complex control of runout table (ROT) cooling. Advanced high strength steels require coiling at temperatures below 500 °C in order to produce a complex multi-phase microstructure. …
-
Experimental study of impingement cooling in rotating turbine blades
Thesis (Ph.D.)--Massachusetts Institute of Technology, Dept. of Aeronautics and Astronautics, 1983.
-
Mixing and atomization by impingement of unconfined liquid jets
Thesis (Sc.D.) Massachusetts Institute of Technology. Dept. of Chemical Engineering, 1949.
-
The effect of entrainment on jet impingement heat transfer
An analytical and experimental study was done to determine the effect of entrainment on the heat transfer to a single, plane, turbulent impinging jet. Solutions to the momentum and energy equations were obtained with similarity and series analyses. The analytical model is compared with measured …
-
Computational Investigation of Impingement Cooling for Regeneratively Cooled Rocket Nozzles
<p>Jet impingement cooling is an internal cooling configuration used in the thermal management of temperature sensitive systems. With rocket engine combustion temperatures rising as high as 3600 K, it is essential for a cooling method to be applied to ensure that the nozzle integrity can be …
-
Propeller tip vortex impingement and vibratory force on a rudder.
Massachusetts Institute of Technology. Dept. of Ocean Engineering. Thesis. 1974. M.S. (Also M.S. in Mechanical Engineering).
-
An experimental investigation of liquid jet impingement heat transfer theories
Thesis (B.S.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1990.
-
Numerical study of jet impingement cooling on a smooth curve surface
… results displayed are determine the influence of impingement jet characteristics on thermal and flow field on a curve surface, determine the variation of Nusselt numbers (NuD) along the curve surface in order to understand the heat transfer characteristics and study the effect of position (in the …
-
Stagger angle effects on impingement cooling of a rotating turbine blade
Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Aeronautics and Astronautics, 1984.
-
A theoretical and experimental study of the impingement of two subsonic jets
A theoretical and experimental investigation has been performed on the determination of the characteristics of two impinging plane turbulent jets for the purpose of under1tanding the performance of proportional fluid amplifiers and momentum-exchange devices . The jet deflection angle was determined …
Page 1 of 14