Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 166 for “"austenitic"”.
-
Transformation toughening of metastable austenitic steels
Thesis (Ph.D.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 1984.
-
Cold rolling of austenitic stainless steel
Thesis (B.S.) Massachusetts Institute of Technology. Dept. of Metallurgy, 1953
-
Impact fracture of austenitic stainless steels
… careful material selection is imperative. Austenitic stainless steels may be a likely choice for hydrogen service because their behavior in high pressure hydrogen ranges from no apparent damage to relevant, but generally small ductility loss (13). Because of this Variation in behavior, a …
-
Stress corrosion cracking of austenitic stainless steels
… cracking behavior of metastable and stable austenitic stainless steels, constant elongation rate tests (CERT) and sub-critical crack growth (SCG) tests were used to measure the susceptibility and cracking rate. The tests were performed in H$\sb2$SO$\sb4$/NaCl solutions in the pH ranges from …
-
Cold drawing of austenitic stainless steel wire
Thesis (B.S.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1953.
-
Transformation toughening in phosphocarbide-strengthened austenitic steels
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 1988.
-
High temperature cracking of nickel chromium austenitic steels.
… of AISI 304 (an l8Cr 1ONi non-hardenable austenitic steel in which the grain boundaries are free to migrate) was investigated. A linear relationship between applied cracking stress and the reciprocal of the square root of the grain size was found. This is consistent with the cracking …
-
Embrittlement of Austenitic Stainless Steels by Solute Hydrogen
Mechanical properties of austenitic stainless steel were determined as a function of solute hydrogen concentration. Twenty micron thick foils of types 310s and 304 stainless steel were cathodically precharged to saturation and tested in tension at room temperature. X-ray diffraction experiments …
-
Corrosion fatigue behavior of austenitic-ferritic stainless steels.
Thesis. 1977. Ph.D.--Massachusetts Institute of Technology. Dept. of Materials Science and Engineering.
-
Pitting corrosion initiation in AISI 316 austenitic stainless steel
The initiation of pitting corrosion on AISI 316 stainless steel has been examined from a phenomenological viewpoint with emphasis on the role of the metal in this complex, interaction. A modified potentiodynamic technique was used to prepare specimens corresponding with a series of different points …
-
Transformation toughening of [gamma][prime]-strengthened metastable austenitic steels
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 1990.
-
Investigating the nature of passive films on austenitic stainless steels
… this goal the passive films formed on three main austenitic stainless steels AISI 316L, AISI 304 and AISI 254SMO in borate solution were characterised by in situ Raman spectroscopy and photocurrent spectroscopy coupled with electrochemical measurements.
-
Mechanics of strain-induced transformation toughening in metastable austenitic steels
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1991.
-
The cold rolling and primary recrystallisation textures of austenitic stainless steels.
A critical review has been made of available literature on the cold rolling and primary recrystallisation textures of f.c.c. and b.c.c. metals and alloys, with later reference to recent work on stainless steels. Using laboratory and commercial alloys a study has been made of factors influencing the …
-
Factors affecting the constitution and stability of iron-base austenitic alloys.
A study of the constitution of Fe-Cr-Ni based alloys has been carried out. The isothermal sections of the ternary Fe-Cr-Ni system have been determined for temperatures between 1150 C and 650°C by analysing the composition of the individual phases by a micro-probe technique. The transformation …
-
Hydrogen embrittlement testing of austenitic stainless steels SUS 316 and 316L
… hydrogen in the automotive industry, austenitic stainless steels SUS 316 and 316L were used to validate the test programs. Tests were first performed in 25 MPa helium and hydrogen at room temperature and at -40°C. Tests in a 25 MPa hydrogen atmosphere caused embrittlement in SUS 316, …
-
Carbide precipitation in austenitic Fe-Mn-V-C alloys / M.H. Ainsley
Typescript (photocopy)
-
The tribological behaviour of a high nitrogen manganese austenitic stainless steel
… alloys, namely a high nitrogen manganese austenitic stainless steel and a vanadium micro-alloyed stainless steel is compared to the tribological behaviour of standard stainless steels AISI 304 and AISI 316 and to the wear resistant steel, Hadfields manganese steel. The wear tests performed …
Page 1 of 9