Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 7 of 7 for “"aluminum 6061-t6"”.
-
Isothermal Fatigue Life Prediction Techniques
… against experimental results from testing of Aluminum 6061-T6 specimens at room temperature. Second, a unique isothermal-mechanical fatigue life testing capability was constructed and utilized in the development of an isothermal-mechanical fatigue life prediction method. This method was …
-
Design and analysis of the front suspension geometry and steering system for a solar electric vehicle
… and steering rack extenders, both made out of Aluminum 6061-T6, are designed based off of this geometry and are optimized for weight and machinability.
-
Determination of Wall Thickness and Height when Cutting Various Materials with Wire Electric Discharge Machining Processes
… <p>Five different metals are used for the test; Aluminum 6061 T6, Yellow Brass SS360, 420 Stainless Steel, D2 unheat-treated tool steel 25-30 RC, and D2 heat-treated tool steel 60-65 RC. The small parts were cut to a 6mm (0.2362 inch) height with six different wall thicknesses: 0.30mm (0.0118 …
-
Critical Erosion/Corrosion Piping Wall Thicknesses Under Static and Fatigue Stress Conditions According to ASME Guidelines
… alternating Stress-to-Number of cycles curves: Aluminum 1100, Aluminum 3003-0, Aluminum 6061-T6, and Nickel 200. In addition, procedures of the ASME for fatigue curve analysis and implementation of fatigue data were investigated. These four stress-to-number of cycles (S-N) fatigue curves were …
-
Comparing the Feasibility of Cutting Thin-Walled Sections from Five Commonly Used Metals Utilizing Wire Electric Discharge Machining
… five metals that were used in this study are: Aluminum 6061 T6, Yellow Brass SS360, 420 Stainless Steel, D2 Tool Steel at 25 to 30 RC, and D2 Tool Steel at 60 to 65 RC. The thin-walled sections were constrained on each end by the parent material to which they remained attached, and they ranged …
-
Experimental study of elasto-plastic wave propagation in one-dimensional and two-dimensional disk arrays
… of disks in contact. The disks are made of aluminum 6061 T6 and are selected because of their rate-independence, thus allowing static contact force-displacement laws to be used in the dynamic case. Although differing considerably between each other, the loading magnitudes in the drop tower …
-
Crack Path Selection in Adhesively Bonded Joints
… of rubber concentration as an adhesive, and aluminum 6061-T6 alloy with different surface pretreatments as the adherends, both symmetric and asymmetric double cantilever beam (DCB) specimens are prepared and tested under mixed mode fracture conditions in this study. Post-failure analyses …