Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 10 of 10 for “"Time-Temperature Superposition Principle (TTSP)"”.
-
Development of tension and compression creep models for wood using the time-temperature superposition principle
… for wood in tension and compression using the Time-Temperature Superposition Principle (TTSP). The principle states that the long-term response of a polymer at lower temperature is equivalent to the short-term response at a higher temperature. Accelerated creep tests were conducted in tension …
-
Modeling the High Strain Rate Tensile Response and Shear Failure of Thermoplastic Composites
… from 10^-4/s to 10^-1/s and shifted using the time-Temperature Superposition Principle (tTSP) to strain rates of 10^-4/s to 10^6/s. Other fiber properties are obtained from the same tests, but are assumed to be deterministic. Matrix properties are also assumed to be deterministic and are …
-
Thermoviscoelastic characterization and predictions of Kevlar/epoxy composite laminates
… ([0]₈, [10]₈, and [90]₁₆) lamina specimens. The Time-Temperature-Superposition-Principle (TTSP) was used successfully to accelerate the characterization process. A nonlinear constitutive model was developed to describe the stress dependent viscoelastic response for each of the material …
-
Characterization of the Interfacial Fracture of Solvated Semi-Interpenetrating Polymer Network (S-IPN) Silicone Hydrogels with a Cyclo-Olefin Polymer (COP)
… for the measurement of fracture properties over time in environments of interest. In this case, the test was performed at discrete temperatures within range of 4Ë C to 80Ë C. Two COP adherends were bonded together by a layer of one of the S-IPN silicone hydrogels. Upon the insertion of a wedge …
-
Wetlaid Cellulose Fiber-Thermoplastic Hybrid Composites - Effects of Lyocell and Steam Exploded Wood Fiber Blends
… modulus-building efficiency (by as much as 2.6 times) in the hybrid composites. This observation indicated possible synergism between lyocell and SEW. Analyses of composite property gains as a function of fiber cost also showed greater cost benefits (highest for tensile modulus) in favor of …
-
Long-term creep modeling of wood using time temperature superposition principle
… were developed from short-term data using the time temperature superposition principle (TTSP) for kiln-dried southern pine loaded in compression parallel-to-grain and exposed to constant environmental conditions (~70°F, ~9%EMC). Short-term accelerated creep (17 hour) and recovery (35 hour) data …
-
Displacement rate and temperature effect on asphalt concrete cracking potential
… conditions and heavy traffic loads. Daily temperature fluctuations and traffic loading are among the external causes of crack initiation and development in pavements whereas structural design of pavements, base and subgrade support and conditions, material properties, and drainage …
-
Understanding the effect of nanofillers on the properties of polypropylene and glass fiber/polypropylene multiscale composites
… between the tensile modulus, glass transition temperature and the amount of constrained phase, as assessed through tensile and DMA analyses, revealed the presence of a secondary reinforcing mechanisms, which, concurrently to the primary stiffening effect of the high modulus filler, contributes …
-
Studying the Effects of Thermo-oxidative Aging on the Mechanical, Tribological and Chemical Properties of Styrene-butadiene Rubber
… factors are humidity, ozone, oxygen, temperature, radiation (UV rays), etc. This study focuses on the effects of two of these factors acting in tandem, oxygen and temperature. In the past, studies have been conducted to observe the effects of rubber aging on the mechanical and wear …
-
Long-term Durability Characterization and Prediction of a Urethane-based Adhesive
… properties however, can vary greatly with time, temperature, and environmental exposure conditions such as moisture. It is therefore critical, to understand the behavior of adhesives over the range of conditions that a bonded component might experience. In this work, the behavior of a …