Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 1029 for “"Spray"”.
-
Spray generation
This is an experimental investigation of the ligaments and drops generated at the free surface of liquid wall jets and liquid axisymmetric jets flowing over sand and polystyrene (beads) roughed surfaces. Experiments were conducted with freshwater and Eulerian and Lagrangian methods of description …
-
Investigation into continuous spray and metered spray using compressed gas propellant
… aerosol products are generally based on either spraying continuously (i.e. airfreshners, body spray, hairspray, insecticide, polish and disinfectant) or on spraying on metered liquid dosage. This investigation has focused on two different aerosol products: (i) Continuous spraying aerosol with …
-
Atomized dielectric spray-based electric discharge machining (spray-EDM) for sustainable manufacturing
… gap. A novel method of using atomized dielectric spray in EDM (Spray-EDM) to reduce the consumption of dielectric is developed in this study. The atomized dielectric droplets form a moving dielectric film up on impinging the work surface that penetrates the inter-electrode gap and acts as a …
-
Spray Drying of Soymilk
… standards. In the development of a process for spray dried soymilk, the Food Science/INTSOY soymilk method was selected as the basic liquid soymilk preparation technique because this method resulted in a product with good acceptability. Since this method was intended to produce pasteurized …
-
Numerical Simulation of a Cryogenic Spray
<p>Cryogenic sprays have many applications in modern engineering. Cooling of electronic equipment subject to high heat flows, surgical ablation of gastrointestinal mucosae or orbital maneuvering are a few examples of their versatility. However, the atomization of a cryogenic liquid is a complex …
-
Spray Techniques And Lung Cancer Chemoprevention
… the systemic toxicity as well as side effects. Spray techniques are widely used for aerosol delivery. Two spray techniques were evaluated in this study for their applications in lung cancer chemoprevention. One is the spray-drying process which was used to study the inhibitory effects of …
-
The morphology of spray-dried particles
Samples of Various industrial or pilot plant spray-dried materials were obtained from manufacturers together with details of drying conditions and feed concentrations. The samples were subjected to qualitative and semi-quantitative examination to identify structural and morphological features. The …
-
Spray ignition enhancement for multifuel propulsion
Submission original under an indefinite embargo labeled 'Open Access'. The submission was exported from vireo on 2023-12-04 without embargo terms
-
Spray deposition of cork reinforced polyester
… initial investment and high flexibility of the spray lay-up process make it an attractive candidate to study. A spray lay-up apparatus was successfully constructed and employed in manufacturing parts from a hybrid material composed of granulated cork, chopped glass strand, and a polyester …
-
Droplet Drag Modeling on Spray Conditions
… of large droplets. In applications such as spray combustion, droplets of various sizes are generated and move with the flow. Large droplets tend to deform in the flow, and they have complex interactions with the flow because of this deformation. To better model spray, the physical …
-
Effect of liquid properties (water and lime juice) on spray characteristics of deflected flat spray nozzle (AL-75)
… industry. The main factor that influences the spray is pressure of the liquid and air, type of nozzle, type of spray and the viscosity of the liquid. The problem in this research is to determine minimum liquid pressure used for atomization. This study is on characteristic with different ratio …
-
SPRAY-DRIED BIOADHESIVE FORMULATIONS FOR PULMONARY DELIVERY
… of lipid microparticles prepared using spray-drying for drug delivery to the lung via dry powder inhalers. Bioadhesive formulations such as prochitosome or chitosome powders have been introduced to overcome the drawbacks of liposome instability and potentially provide significant …
-
Structure and stabilization of cryogenic spray flames
… is a realistic model of the base of a cyrogenic spray flame. Through this progression the non-dimensional parameters governing behaviour are introduced successively and the most influential parameters are identified. The final result will aid design both of the engine and the control sequences of …
-
Agricultural spray droplet dispersion in turbulent windflow
Off-target contamination (or spray drift) during agricultural chemical application, arising from removal of small (diameter < 100 m) droplets from sprays by atmospheric or vehicle-generated cross flows, is investigated experimentally. The primary requirement for realistic wind tunnel studies is …
-
Porous Materials Prepared by Ultrasonic Spray Pyrolysis
The second approach was used to prepare meso- and macroporous carbons. A variety of carbon morphologies were observed (as indicated by SEM and TEM). Analysis of the carbon precursors using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) suggests that the decomposition …
-
Spray characteristics of throttle body fuel injection
… program was undertaken to characterize the spray behavior of a throttle body injection system. Qualitative data were obtained using photomicrography, schlieren photography and videotape. Additionally, the laser based Phase/Doppler Particle Analyzer was used throughout the investigation to …
-
Spray cooling applications for alternative energy vehicles
… induced drag. Here we examine utilizing water to spray onto the heat exchangers to increase performance, allowing a decrease in surface area required for heat exchangers in alternative fuel source vehicles. The scalable and optimized super hydrophilic heat exchangers developed here at UIUC have …
-
Ignition and propagation mechanisms of spray flames
… analysis of the phases of ignition in sprays is carried out in a controlled, well-characterised experiment: the initiation of a spherically expanding flame in a turbulent droplet-laden jet by a laser spark. A revision of definitions of ignition-related terms is proposed based on a …
-
Spray forming, droplet microstructure and impingement behavior
Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 1996.
Page 1 of 52