Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 4 of 4 for “"Separated Sector Cyclotron"”.
-
Measurement of fluence at the D-line fast neutron facility at iThemba LABS
… pulsed proton beams obtained from the k = 200 separated sector cyclotron. Three incident proton beam energies were used in this work, namely 65.99 MeV, 99.44 MeV and 203.33 MeV. From time-of-flight measurements with the NE213 scintillator, the spectral fluence of the neutron beams was obtained. …
-
Monte Carlo simulations of the iThemba LABS neutron beam facility
… targets of 7Li and 9Be with protons from the separated-sector cyclotron. The neutrons are collimated to produce a beam with a diameter of about 50 mm at a flight path of 7.7 m from the target. The collimator geometry is designed to maximize the central part of the beam resulting in a beam with …
-
Radiation Shielding calculations using MCNPX transport code for cost optimization of the shielding material to be used at iThemba LABS.
… Sciences (iThemba LABS), the shared use of the Separated Sector Cyclotron has reached the point where further advancement of the respective disciplines cannot be realised. The new facility is proposed to respond to the demands of these, specifically a phased development of Radioactive Ion Beam …
-
Measurements of gamma-ray production cross sections of proton beam at energies of 66 to 125 MeV with calcium target
… range of 66 MeV to 125 MeV delivered by the Separated Sector Cyclotron (SSC) at iThemba LABS.Three standard -ray emitting sources, 137Cs, 60Co and 152Eu, were used for energy and e_ciency calibrations of the detectors. Geant4 code was run for modeling the efficiency of the AFRODITE detector …