Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 6 of 6 for “"Punching Shear Capacity"”.
-
Characterization of Punching Shear Capacity of Thin Uhpc Plates
… and contained no reinforcing steel to resist shear. The lack of steel reinforcement allowed for the possibility of a punching shear failure to occur from the application of a point load such as a wheel tire patch load. The model and optimized section served as the foundation for this research, …
-
Punching shear capacity of flat slab-column junctions (a study by 3-D non-linear finite element analysis)
This thesis presents a study of punching shear capacity of flat slab-column junctions. A three dimensional non-linear finite element program based on 20 node isoparametric solid element was used for the investigation. The non-linear 3-D elastic isotropic model proposed by Motsovos was used to …
-
Column Footings Strengthened with External Prestressing and External Wrapping Systems
… systems, especially on their improvements in the punching shear capacity. 353 models were built in ABAQUS. For each system, a unique group of parameters were considered and investigated. As an active system, CEP significantly improved the punching shear capacity of RC footings, and the number of …
-
An investigation into the punching shear failure in R.C. waffle slabs subjected to concentrated load
… when subjected to concentrated loads. The punching shear failure inside waffle slabs has not been thoroughly investigated and this is also reflected in the current code of practice, which, in the main, relates the design of punching shear in waffle slabs to that in solid slabs. In this …
-
An experimental study and finite analysis of punching shear failure in steel fibre-reinforced concrete ground -suspended floor slabs
… effect of using steel fibre-reinforcement on the punching shear behaviour of ground-suspended slabs with internal columns. The main objectives of this research were to develop a constitutive model for steel fibre-reinforcement (SFRC), to study experimentally the punching shear behaviour of SFRC …