Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 17 of 17 for “"Pressure Swing Adsorption"”.
-
Purification of Ammonia by Pressure Swing Adsorption
… ammonia along with recovery of the products by adsorption separation method and significantly decrease the energy requirement in ammonia production.</p> <p> Pressure swing adsorption (PSA) technology enables the energy-efficient recovery of specific compounds from a gas under pressure. In this …
-
Cycle Scheduling and Design of Pressure Swing Adsorption (Psa) Cycles For Carbon Dioxide Capture From Flue Gas
… Among many viable CO2 capture options available, Pressure Swing Adsorption (PSA) is gaining widespread industrial acceptance because of its attractive economics. The goal is to capture 90% of the CO2 from stack or flue gas, concentrate it to over 95 vol%, and sequester it somewhere in the Earth. …
-
Gas purification by short cycle pressure swing adsorption. Experimental and theoretical studies of a fixed bed adsorption process for the separation of carbon dioxide from air at ambient temperatures using molecular sieve 5A and activated charcoal adsorbents.
An experimental pressure swing adsorption unit has been constructed and used to investigate the separation of carbon dioxide from carbon dioxide enriched air using both an activated carbon and a type 5A molecular sieve adsorbent. Continuous, cyclic operation was achievedusing a pair of fixed bed …
-
Atmospheric Carbon Capture: A Review on Current Technologies and Analysis of Energy Consumption for Various Direct Air Capture (DAC) Systems
… direct-air CO<sub>2</sub> capture plants. Pressure swing adsorption another gas separation technique used in industry today that can be modified for atmospheric carbon capture. The discussion of energy consumption for cryogenic and combined direct air capture systems is explored in this …
-
Simulation and Comparison of Operational Modes in Simulated Moving Bed Chromatography and Gas-Phase Adsorptive Separation
… simulation of gas-phase adsorptive processes by pressure swing adsorption and temperature swing adsorption technologies. The applications of SMB chromatography are popular in separating and purifying enantiomers, petrochemicals, pharmaceuticals and biochemicals with higher yield and lower solvent …
-
Modelling and simulation of a pressure swing reactor
A Pressure Swing Reactor is a unit designed to incorporate simultaneous reaction and separation into one unit operation. The concept expands on the well-established method of Pressure Swing Adsorption, with the addition of catalyst to allow reaction to take place. The PSR is operated with a four …
-
Reverse-selective gas-separation membranes prepared by atom transfer radical polymerization
… and the energy and capital–intensive pressure swing adsorption (PSA) procedures for CO<sub>2</sub> removal exhibit some unavoidable H<sub>2</sub> loss. Membrane separations, especially those with reverse-selective membranes that selectively permeate CO<sub>2</sub> from H<sub>2</sub> …
-
ADVANCED MATERIALS AND PROCESSES FOR GAS SEPARATION AND STORAGE APPLICATIONS
… development of new materials that exhibit high adsorption capacity and selectivity, fast kinetics, and long-term durability under multicomponent conditions is becoming attractive for the applications in clean energy. Moreover, novel sorbents and separation systems that can store gases at normal …
-
Carbon Dioxide Capture with K-Promoted HTLC at High Temperature
… process streams is highly needed. Various cyclic adsorption processed are showing some promise as economic feasible options for CO2 capture. To this end, hydrotalcite-like compounds (HTlcs), when promoted with metal carbonate, such as K2CO3, have attracted considerable attention in the literature …
-
Design and Development of a Portable Multi-user Medical Grade Oxygen Concentrator
… oxygen concentrator using the Skarstrom pressure swing adsorption cycle, incorporating a silica gel drying tank and 13X Zeolite adsorption beds. Critical parameters such as compressor output pressure, heat exchanger efficiency, systemic pressure losses, air separation duration, and peak …
-
Development of A Cascade Adsorption Process For Rapid Xenon Concentration From Air For Nuclear Proliferation Monitoring
… to develop a process that exploits using pressure swing adsorption (PSA) principles for rapid xenon concentration from air and analysis for use in nuclear proliferation monitoring. The primary scope of this effort is to provide mathematical modeling support and other technical support to …
-
Evaluation of sorbents for the cleanup of coal-derived synthesis gas at elevated temperatures
… carbon dioxide and mercury. We developed pressure swing adsorption models for the removal of carbon dioxide using both metal oxide and metal hydroxide sorbents and incorporated them into IGCC process simulations in Aspen Plus in order to evaluate the energy penalties associated with using …
-
Characterisation of metal-organic frameworks with inherent functionalisation for carbon capture methods
… analysis, and elemental analysis. Adsorption properties were evaluated using volumetric nitrogen adsorption at 77 K, which showed all three materials experienced activated diffusion, and gravimetric carbon dioxide adsorption at 273 K. Further gravimetric adsorption analysis was …
-
Investigation of adsorbent-based warm carbon dioxide capture technology for IGCC system
… incipient wetness impregnation. The reversible adsorption isotherm, cyclic stability, and sorption rate were measured using a custom-built high pressure microbalance system and a thermogravimetric analyzer. Experimental data indicate the sorbent has a fairly large regenerable capacity in 180-240 …
-
Study of the effects of promoters (MnOx and FeOx) on Co3O4/CeO2 during Preferential Oxidation of Carbon monoxide
… techniques such as selective CO methanation and pressure swing adsorption (Park, Lee and Lee, 2009). Catalysts used for CO-PROX are either noble metal or transition metal oxide based. Noble metal-based catalysts have a low CO oxidation activity at temperatures below 200 °C, higher cost, and lower …
-
3D-printed adsorbents for gas separations: A material development, kinetic assessment, and process performance investigation
… enhancing mass transfer properties and reducing pressure losses. In this research, various adsorbents were engineered into structured contactors with 3D printing. The overall goal of this research was to improve the formulation methods of 3D-printed adsorbents and understand their performances in …
-
Microporous Organically Pillared Layered Silicates (MOPS) with tunable Functionality
… ermittelten Porenweiten (4-7 Å). Auch Xenon-Adsorptionsenthalpien, die sowohl durch Xenon-Physisorptionsmessungen als auch durch Anpassung der chemischen Verschiebung des 129Xe-Kerns aus CF-HP 129Xe-Messungen berechnet wurden, stimmten sehr gut überein. Somit kann diese alternative Methode …