Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 8 of 8 for “"Plaxis 3D"”.
-
Sustainable slow maintained pile load test
… has been analysed with the use of SolidWorks and Plaxis 3D software. SolidWorks software emphasizes on the model load-deflection relationship while Plaxis 3D ensures a correlation of reaction between pile uplift force and soil. Then, the model was tested on site to determine the relationship …
-
Three-dimensional analysis of surface settlement in soft ground tunneling
… in soft ground. The finite element program "PLAXIS 3D Tunnel" was used to carry out the numerical analysis for the earth pressure balance (EPB) shield tunneling method in a saturated, normally consolidated clay. The two construction parameters that were varied were the face pressure and the …
-
Numerical simulation of ground movements and structural forces in lining for Earth Pressure Balance (EPB) tunneling in clay
This thesis describes the development of a 3D finite element model for representing mechanized tunnel construction using an Earth Pressure Balance (EPB) machine in clay. The model uses the commercial FE code, Plaxis 3D, to represent the face pressure, conical shield, grouting process and activation …
-
The performance of polyurethane grout to stabilise hemic peat
… Numerical analysis was conducted by using PLAXIS 3D Foundation software to determine the boundary for laboratory and field models, as well to determine the grouting depth for PU. The depth of grouting for laboratory scale models were determined at 100 mm and 200 mm, while for the field …
-
Three-dimensional finite element analysis of a complex excavation on the MIT campus
… of three-dimensional finite element analysis in Plaxis 3D 2011 to simulate ground deformations, pore pressures, and diaphragm wall deflections for the very well instrumented excavation for the basement of the Stata Center on the MIT campus. The model predictions are compared with the field …
-
Performance of short piled raft foundation system on peat soil under static load
… by comparing some results of simulation using Plaxis 3D Foundation software for numerical modelling. The software was also used for another simulation series with some different soil parameters and site conditions. The selected results of numerical modelling were verified by using the full …
-
Behaviour of single batter piles and pile groups under lateral soil movement in sand
… finite element method were performed using PLAXIS 3D software with "embedded pile" feature to predict and compare the results from the single batter piles and pile groups tests in sand. In all the predictions, the numerical analysis was shown to be able to predict the experimental results …
-
Odvodnění stavební jámy - numerická analýza
… dílčí problémy jsou modelovány jako 2D a 3D úlohy na zvoleném příkladu stavební jámy. Jsou srovnávány s analytickým řešením a teoretickými poznatky o daném problému. Studie se zaměřují na stanovení přítokového množství, tvar depresní křivky, určení velikosti numerického modelu a vliv …