Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 4 of 4 for “"Mass flow controller"”.

  1. Controlling fuel and diluent gas flow for a diesel engine operating in the fuel rich low-temperature-combustion mode

    The flow of a diluent gas supplied to a motoring engine was controlled at a diluent to air mass flow ratios of 10%, 30%, 50%, and 70%. This arrangement was a significant set up for running the engine in the Low-Temperature Combustion mode. The engine used was a 436 cc Yanmar Diesel engine, driven …

    mit Repository record for Controlling fuel and diluent gas flow for a diesel engine operating in the fuel rich low-temperature-combustion mode (opens in a new tab)

  2. Computer data acquisition, control, and analysis for the University of Tennessee at Chattanooga's internal combustion engine labratory

    … the pressure drop across the Meriam laminar flowelement. This signal was also calibrated used an inclined manometer.Output signals from all transducers and the gas analyzers were supplied to three EXP-16 boards according to their ranges. The OMEGA EXP-16 boards are channel multiplexers. They …

    utc Repository record for Computer data acquisition, control, and analysis for the University of Tennessee at Chattanooga's internal combustion engine labratory (opens in a new tab)

  3. Hot jet ignition delay characterization of methane and hydrogen at elevated temperatures

    This study contributes to a better understanding of ignition by hot combustion gases which finds application in internal combustion chambers with pre-chamber ignition as well as in wave rotor engine applications. The experimental apparatus consists of two combustion chambers: a pre chamber that …

    iupui Repository record for Hot jet ignition delay characterization of methane and hydrogen at elevated temperatures (opens in a new tab)

  4. Modeling and experimental process optimization for a SiH4 + H2 surface wave plasma discharge for silicon photovoltaics

    … at 10 nm/s and could be increased if a higher flowrate mass flow controller was used. Film thickness was measured via profilometry with verification through SEM imaging, while the crystallinity was determined via peak fitting of Raman spectra. A distinct transition from nc-Si to a-Si was …

    uiuc Repository record for Modeling and experimental process optimization for a SiH4 + H2 surface wave plasma discharge for silicon photovoltaics (opens in a new tab)