Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 7 of 7 for “"Longitudinal Splitting"”.
-
Developing a prism qualification test to ensure adequate splitting resistance in pretensioned concrete railroad ties
… of a qualification test to ensure adequate splitting resistance in pre-tensioned concrete railroad ties. The research evaluated the influence of the edge distance, compressive strength of concrete and the type of wire indentation on bond performance between prestressing steel and concrete …
-
Mechanical Property Evolution and Thermal Remediation of Aluminum Magnesium 5xxx Alloys Following Low and Intermediate Temperature Thermal Exposure
… in mechanical properties in the LT orientation. Longitudinal splitting in the short-transverse (ST) direction has been observed during fatigue after sufficient time and temperature exposure combinations. Fracture and fatigue testing has additionally been employed on long-time sensitized material. …
-
Standoff Screws Used In Composite Joists
… failure modes, concrete rib failures, and longitudinal splitting of solid concrete slabs, are presented.
-
Further Investigation of Standoff Screws Used in Composite Joists
… failure modes, concrete cone failures and longitudinal splitting, are presented.
-
Longitudinal Slab Splitting in Composite Girders
Longitudinal slab splitting in composite hot rolled girders and joist girders was investigated. Two different type of framing configurations were studied with two tests conducted per configuration. The framing configurations were designated as either flush-framed or haunched, which describes the …
-
Longitudinal shear resistance of steel and concrete composite beams
In this study the longitudinal shear resistance of steel and concrete composite beams using conventional headed stud connectors has been investigated through the testing of 42 push-out specimens. In addition, the applicability of the existing design codes and the standard specimen used in assessing …
-
The residual strength determination due to fatigue loading by fracture mechanics in notched composite materials
… strength was attributed to the elliptical hole, longitudinal splitting, matrix cracking (reduction moduli of plies), crack propagation and local delamination. Due to the thin through-the-thickness notched laminate, two-dimensional FEM was used and interlaminar stresses were not considered. …