Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 85 for “"Indium-Tin Oxide"”.
-
UWB antenna using indium tin oxide (ITO)
… of the UWB antenna characteristics using Indium Tin Oxide (ITO) and AgHT were investigated. Parametric studies were performed to quantify the effect of the ITO and AgHT characteristics as well as the PET (plastic polymer) coating. All those parametric studies are conducted and simulated …
-
Reduced Indium Tin Oxide as a Transparent Superconductor
Absorption of optical light in superconducting electronics is a major limitation on the quality of circuit architectures that integrate optical components with superconducting components. Such absorption causes losses in the optics and quasiparticle generation in the superconductor, decreasing the …
-
Magnetism and spin transport studies on indium tin oxide
… systematic study of the investigation into using Indium Oxide based materials in next generation spin-transport electronic applications. Initial studies focused on the optimisation of the electrical properties of Indium Oxide (In2O3) and Tin(Sn)-doped Indium Oxide (ITO) thin films grown using DC …
-
Sputter deposition and characterization of metal sandwiched indium tin oxide/silicon for solar cell application
For the past four decades, indium tin oxide (ITO) thin films have been widely used as transparent and conductive contact layer in several optoelectronic applications due to their high optical transmission and good electrical conductivity. Because of the rapid advancement of optoelectronic devices, …
-
Enabling Hybrid Optical-Microwave Space Communications with Optically Transparent RF Components Using Indium Tin Oxide (ITO)
… of optically transparent antennas using Indium Tin Oxide (ITO) films on alkaline earth boro-aluminosilicate glass for transparent radio-frequency (RF) applications in space communication systems. Addressing the limitations of traditional metal-based antennas—particularly their shadowing …
-
Designing Enhanced Nonlinearity in Plasmonic Devices with Epsilon-Near-Zero Films
… plasmonic slab waveguide incorporating an ultrathin indium tin oxide epsilon-near-zero layer (5–50 nm), and a dielectric-loaded surface plasmon polariton waveguide. Finite element method simulations were performed in COMSOL Multiphysics 6.2 using the Wave Optics Module. Parametric …
-
In-Plane Conductance of Thin Films as a Probe of Surface Chemical Environment: Adsorbate Effects on Film Electronic Properties of Indium Tin Oxide and Gold
… adsorption at the surface. Reaction of the indium tin oxide (ITO) surface with Bronsted acids (bases) leads to increases (decreases) in its in-plane conductance as measured by a four-point probe configuration. The conductance varies monotonically with pH suggesting that the degree of surface …
-
The industrial development of transparent conducting coatings by a Sol-Gel route
Transparent conducting coatings are used in a wide range of applications, particularly displays and photovoltaic devices, and demand is anticipated to increase with the rise of plastic electronics. Indium tin oxide, deposited by sputter coating, is widely used. Concerns over the cost and long term …
-
Near room temperature lithographically processed metal-oxide transistors
… was developed for the purpose of fabricating transistors based on metal-oxide channel materials. The combination of indium tin oxide (ITO) as the source/drain electrodes, zinc indium oxide (ZIO) as the semiconducting channel, and parylene as the dielectric was used to demonstrate the …
-
Titanium dioxide (TiO2) as buffer layer in organic solar cell device
… active layers (donor and acceptor) sandwiched by indium tin oxide (ITO) (a high work function, transparent metal oxide) as the anode and low work function metal such as aluminum (Al) as cathode. The recent power conversion energy (PCE) has reached as high as 7.4%. But in spite of high PCE, this …
-
Transparent Platinum Counter Electrode for Building Integrated Dye-sensitized Solar Cells
… nanoparticles (Pt-NPs) on hot substrates. The platinum consumption hence the cost of the counter electrode was reduced over 86%, compared to conventional Pt counter electrode prepared by sputter deposition method. The prepared Pt-NP film led to 89% transparency and 80% transparency when integrated …
-
Investigation of short-range surface forces to develop self-organizing devices by Steven M. Tobias.
… were used to verify surface energy components of indium tin oxide and mesocarbon microbeads. These materials were selected based on spectroscopic and thermodynamic parameters to be used in self-organizing devices. Estimates for surface energy were based on the van der Waals contribution described …
-
TRANSPARENT ELECTRODE AND NOVEL BUFFER LAYER MATERIALS FOR ORGANIC PHOTOVOLTAICS
… materials, including hole and electron transporting layers, which can establish ohmic contacts between the active layer and the two electrodes are essential parts. In this thesis, the study on transparent conductive polymeric electrode, which can replace normally used electrode indium tin oxide …
-
PLED Enhancement and Re-use
Polymer light emitting diodes (PLEDs) represent new technology for display applications. However, these polymer based devices could benefit from increased efficiency and material longevity. This thesis examines how preprocessing PLED indium tin oxide (ITO) anodes and reprocessing previously used …
-
Fabrication and photonics properties of III-V semiconductor nanowire structures
… up by utilizing nanowire arrays, attributing to the increasing optical inter-wire interaction between incident light and nanostructures.</p> <p>However, to form a very thin, vertical IIIV nanowire array is challenging for both conventional top-down and bottom-up approaches due to the …
-
Improved Fabrication and Quality Control of Substrate Integrated Microelectrode Arrays
… (2) and loss of gold at the gold electroplated indium-tin oxide (ITO) electrodes. The objective of this investigation was to correct these major problems. Quality control measures were employed to monitor MMEP fabrication variables. The phenotypes of polysiloxane degradation were identified and …
-
Some novel aspects of DC and AC powder electroluminescence (DCEL)
… DCEL device following the forming process, suggesting that the forming process may be due to oxidation. Indium tin oxide (ITO) conductive-coated plastic was used successfully as a replacement for ITO-coated glass in DCEL devices and methods were developed for the use of cross-linked linseed oil as …
Page 1 of 5