Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 316 for “"Flat Plate"”.
-
Flat Plate-Free Jet Impingement Studies
Made available in DSpace on 2014-12-09T18:12:23Z (GMT). No. of bitstreams: 1 6812127.pdf: 2401029 bytes, checksum: cf2a87216bd80e344ceacff1b11b1b0b (MD5) Previous issue date: 1968
-
Wave reflection by a flat plate cascade
Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Aeronautics and Astronautics, 1990.
-
Localized disturbances in a flat plate boundary layer
Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Aeronautics and Astronautics, 1994.
-
BOUNDARY LAYER ON FLAT PLATE WITH LEADING EDGE PATTERNS
… VORTICES IN THE BOUNDARY LAYER OF A FLAT PLATE HAS BEEN EXPERIMENTALLY INVESTIGATED BY MEANS OF SMOKE-WIRE FLOW VISUALIZATION AS WELL AS THE HOT-WIRE ANEMOMETRY. DIFFERENT LEADING EDGE PATTERNS SUCH AS TRIANGULAR, SINUSOIDAL AND NOTCHED PATTERNS WITH IDENTICAL WAVELENGTH AND AMPLITUDE …
-
Analysis of flat-plate solar collector durability test data
… eight different types of commercially available flat plate solar collectors. The test results for five types of collectors are analyzed. The purpose of the test program was to investigate the feasibility of determining the durability of materials by measuring collector thermal efficiency at …
-
Analysis of a Flat-Plate, Liquid-Desiccant, Dehumidifier and Regenerator
… model for isothermal and non-isothermal flat-plate liquid-desiccant dehumidifiers and regenerators was developed and implemented. The two-dimensional model takes into account the desiccant, water and air flow streams. A parametric analysis was performed to evaluate the influence of some …
-
Flow Separation Control Using Synthetic Jets on a Flat Plate
… simulation is conducted for laminar flow over a flat plate using the commercial software ANSYS FLUENT. The oscillating zero mass jet flow is simulated by imposing a harmonically varying boundary condition on the wall surface.</p> <p>In this work, the effect of synthetic jets for different angles …
-
Analytical Study of Flat Plate Floors With Irregular Column Layouts
Made available in DSpace on 2014-12-10T22:21:30Z (GMT). No. of bitstreams: 1 7114796.pdf: 6102132 bytes, checksum: 2f4f06ae3fa74c95a645e36e9480c2ea (MD5) Previous issue date: 1970
-
Time-dependent response of flat plate structures under high sustained load
… of structural collapse in reinforced concrete flat-plate buildings and develop modeling methods capable of analyzing RC structures under high sustained load. In order to isolate and study aged concrete behavior under high sustained load, ASTM C512 (2010) compressive tests on plain concrete …
-
Simulation and Sizing of Flat Plate Solar Collectors for Grain Drying
Flat plate solar collectors have been proven to be a feasible means of obtaining energy for low temperature grain drying systems. The objective of this study was to provide pertinent information for the design and selection of flat plate solar collectors.
-
Flat plate turbulent boundary layer static temperature distribution with heat transfer
An expression for the static temperature-velocity distribution for a zero pressure gradient turbulent boundary layer is derived based on the differential equations for local heat transfer and shear. The present theoretical method of computation is found to give results that correspond well with …
-
Large Scale Homogeneous Turbulence and Interactions with a Flat-Plate Cascade
… large cascade configuration with six 33 cm chord flat plates spanning the entire height of the test section in the Virginia Tech Stability Wind Tunnel. Three-component hot-wire velocity measurements were obtained ahead, throughout and behind both an unstaggered and a 35º staggered cascade …
-
Characterization of Heat Transfer Enhancement for an Oscillating Flat Plate-Fin
… numerically investigates an infinitesimally thin plate-fin undergoing forced oscillations over a range of amplitudes and frequencies in the presence of an approach flow. Reduced frequencies of 0.25 ≤ k ≤16 and plunge amplitudes of 0.03125 ≤ h ≤ 8 are investigated at Re=100 and Pr = 0.71. It is …
-
Generation of crossflow vortices in a three-dimensional flat plate flow
… generate a crossflow vortex pattern on a swept flat plate, that is typical of swept-wing flows, is presented. A swept flat plate with an elliptic leading edge is mounted vertically in the VPI&SU Stability Wind Tunnel opposite to a swept wall-bump; along with floor and ceiling fairings that …
-
The effects of periodic wake disturbances on flat-plate turbulent boundary layers
… periodically traversing in front of a turbulent flat plate boundary layer inside a low speed wind tunnel. These cylinder wake disturbances simulated the unsteady flow pattern in the compressor section of an axial flow turbomachine. Both time-averaged and ensemble-averaged data were interpreted in …
-
Low Order Representations in the Turbulent Wake of a Normal Flat Plate
The turbulent wake of a normal flat plate, characterized by quasi-periodic vortex-shedding dynamics, is investigated in the context of low-order modeling, non-linear dynamics and kinetic energy transfer. The flow is characterized, coherent-structures are educed through the implementation of three …
-
Flat Plate Boundary Layer Flows Over Catalytic Surfaces for Micro-Combustion Applications
The reactive, flat plate, boundary layer flow over small size Pt plates was studied experimentally for the range of intermediate Reynolds numbers that pertain to micro-combustion applications. Methane-air and propane-air mixtures were burnt catalytically at varying, close-to-stoichiometric …
Page 1 of 16