Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 395 for “"Filler"”.

  1. Low filler volume concentration composite dielectrics

    … of well dispersed high permittivity filler, such as barium titanate, in conjunction with polymers, naturally high breakdown strength materials. The focus of this work was to examine the factors that influence the energy density of a composite: the breakdown strength and dielectric …

    must-thes Repository record for Low filler volume concentration composite dielectrics (opens in a new tab)

  2. Filler effects in resole adhesive formulations

    … research cooperation with focus on how organic fillers affect the properties of phenol-formaldehyde resole (PF) resins that are formulated for veneer applications like plywood and laminated veneer lumber. The PF formulations studied in this work used fillers that were derived from walnut shell …

    vt Repository record for Filler effects in resole adhesive formulations (opens in a new tab)

  3. Analysis of Reinforced Concrete Frames With Filler Walls

    Made available in DSpace on 2014-12-08T23:57:06Z (GMT). No. of bitstreams: 1 6901341.pdf: 3972984 bytes, checksum: 58b933353c0434a61f391bd3dc25d49d (MD5) Previous issue date: 1968

    uiuc Repository record for Analysis of Reinforced Concrete Frames With Filler Walls (opens in a new tab)

  4. Toughening polyester resin by elastomeric coating on filler

    Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Chemical Engineering, 1980.

    mit Repository record for Toughening polyester resin by elastomeric coating on filler (opens in a new tab)

  5. The development of sub-micro filler enhanced polymer composites

    … efficiency in mechanical reinforcement at high filler loadings. The surface area of nano-fillers in high filler loaded composites is too high resulting in insufficient polymer molecules to wet the filler surface and hence increased filler agglomeration occurs. Increasing filler dimension into …

    nott-trent Repository record for The development of sub-micro filler enhanced polymer composites (opens in a new tab)

  6. Rheology And Organic Filler Interactions in Phenolic Resin Formulations

    … residue. These organic waste products act as fillers that reduce the cost, increase the viscosity, and affect the rheology of the fillers. Wheat flour is added as an extender to reduce cost and affect the tack of the adhesive. These organic fillers are lignocellulosic materials that are made …

    vt Repository record for Rheology And Organic Filler Interactions in Phenolic Resin Formulations (opens in a new tab)

  7. Filler effect of mineral powders on ultra high performance concrete

    La conception du béton à ultra-haute performance (BUHP) a été affinée depuis sa conception dans les années 90. En raison de ses très bonnes performances dans les scénarios de structure et de durabilité, de plus en plus de recherches sont menées sur l'optimisation des composants nécessaires pour …

    sherbrooke Repository record for Filler effect of mineral powders on ultra high performance concrete (opens in a new tab)

  8. Analysis of grounding performance for different bio filler medium effect

    … significantly. As a conclusion, pineapple leaves filler shows better medium for enhancing the grounding system performance compared with coir filler due to lower lower grounding resistance. Copper sulfate was able to reduce the ground rod resistance value temporarily although for a short duration.

    uthm Repository record for Analysis of grounding performance for different bio filler medium effect (opens in a new tab)

  9. Lignosulfonate as an Alternative Filler in Bitumen Stabilised Materials (BSMs)

    … asphalt mix design and was proposed for use as a filler in cold mix designs such as bitumen stabilised materials. This research therefore investigated the use of lignosulfonate as an alternative filler to cement in BSMs. Tests were carried out on the BSMs which included preparatory tests on …

    stellenbosch Repository record for Lignosulfonate as an Alternative Filler in Bitumen Stabilised Materials (BSMs) (opens in a new tab)

  10. Polymer Crystallization: Micro- and Nano- Filler Effects on Isotactic Polypropylene

    … morphology, studies about the effects of fillers on the crystallization behavior of composites are of great interest. Nucleated crystallization has been the subject of several studies over the last 50 years or so [Cormia et al. 1962, Binsbergen 1970, Mercier 1990]. In the relative simple …

    poli-torino Repository record for Polymer Crystallization: Micro- and Nano- Filler Effects on Isotactic Polypropylene (opens in a new tab)

  11. Investigation of Weldability in High-Cr Ni-base Filler Metals

    High-Cr Ni-base alloys have been used in the nuclear industry for weld overlay repair of dissimilar metal welds which have been affected by primary water stress corrosion cracking. During welding, defects may result from super-solidus and sub-solidus cracking phenomena. The ability to evaluate and …

    ohiolink Repository record for Investigation of Weldability in High-Cr Ni-base Filler Metals (opens in a new tab)

  12. Steam Cured Self-Consolidating Concrete and the Effects of Limestone Filler

    … with replacing 15% of the cement by limestone filler on the mechanical properties and durability performance of self-consolidating concrete designed and cured for precast/prestressed applications. This study investigates the role of limestone filler on the hydration kinetics, mechanical …

    toronto-retro Repository record for Steam Cured Self-Consolidating Concrete and the Effects of Limestone Filler (opens in a new tab)

  13. Influence of High Aspect Ratio Nanoparticle Filler Addition on Piezoelectric Nanocomposites

    … PNGs through the incorporation of nanoparticle fillers, which have been reported to enhance the piezoelectric properties of the film either directly through their intrinsic piezoelectric properties or through acting as surfaces for the interfacial nucleation of piezoelectric polymer …

    calpoly Repository record for Influence of High Aspect Ratio Nanoparticle Filler Addition on Piezoelectric Nanocomposites (opens in a new tab)

  14. Particulate starch, its effects as a filler in high density polyethylene

    … makes starch a most promising organic filler. This work is primarily a study of the mechanical and thermal properties of starch-filled high density polyethylene and attempts to identify changes caused in the structure of this polymer due to starch filler. Particular attention has also …

    brunel Repository record for Particulate starch, its effects as a filler in high density polyethylene (opens in a new tab)

  15. Effect of Vertebroplasty with Bone Filler Device and Comparison with Balloon Kyphoplasty

    … PURPOSE: To analyze vertebroplasty with a bone filler device compared with conventional kyphoplasty. STUDY DESIGN: A cross-sectional study for comparison of two operation groups. PATIENT SAMPLE: Two-hundred twenty-two patients treated from January 2008 to October 2012 OUTCOME MEASURES: Vertebral …

    ajou Repository record for Effect of Vertebroplasty with Bone Filler Device and Comparison with Balloon Kyphoplasty (opens in a new tab)

  16. Toughening mechanisms in composites of miscible polymer blends with rigid filler particles

    Fillers are often added to polymers improve stiffness at the cost of reduced toughness, but this tradeoff is not universal. Well-dispersed microscopic particles have been shown to improve toughness and stiffness simultaneously in some cases. The effect depends on interparticle distance as well as …

    mit Repository record for Toughening mechanisms in composites of miscible polymer blends with rigid filler particles (opens in a new tab)

  17. Investigation of cork as filler for fiber-reinforced composite material in kayaks

    This project is a continuation in the investigation of ways in which cork can be incorporated into composite material for boats and kayaks without significant performance losses. Fiberglass lay-ups (cloth, mat, and epoxy) and cork-epoxy samples are prepared by vacuum bagging. Samples undergo a …

    mit Repository record for Investigation of cork as filler for fiber-reinforced composite material in kayaks (opens in a new tab)

  18. Increasing students self-esteem through the implementation of the Bucket Filler Lesson Plans

    … group received the implementation of the Bucket Filler Lesson plans in hopes that their self-esteem would improve upon completion of the lessons. The lessons took place over the course of three consecutive Fridays. The control group only received the pre-test and post-test assessment. A Two-Way …

    rowan Repository record for Increasing students self-esteem through the implementation of the Bucket Filler Lesson Plans (opens in a new tab)

  19. An Investigation of the Interaction of Reinforced Concrete Frames With Masonry Filler Walls

    Made available in DSpace on 2014-12-10T22:21:35Z (GMT). No. of bitstreams: 1 7121116.pdf: 14882956 bytes, checksum: 7c03c231bb302b52354029404707e6eb (MD5) Previous issue date: 1971

    uiuc Repository record for An Investigation of the Interaction of Reinforced Concrete Frames With Masonry Filler Walls (opens in a new tab)

  20. Finite Element Study of the Elastic Behavior of Plane Frames With Filler Walls

    Made available in DSpace on 2014-12-10T22:21:47Z (GMT). No. of bitstreams: 1 7212396.pdf: 2882193 bytes, checksum: 5a9d6e6c443f3f7c5a0cf676e7b18824 (MD5) Previous issue date: 1971

    uiuc Repository record for Finite Element Study of the Elastic Behavior of Plane Frames With Filler Walls (opens in a new tab)

Page 1 of 20