Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 33 for “"Dünne Schicht"”.
-
Abscheidung und Zersetzung von Selten-Erd-Oxid-Precursorn auf der H-terminierten Si(111)- und der SiO 2 -Oberfläche
… Thermolyse des Precursors statt, sodass eine dünne Schicht aus La2O3 auf der Oberfläche zurück blieb. Diese Schicht wurden mit den Methoden der Röntgenphotoelektronenspektroskopie (XPS), der Rastertunnel- und der Rasterkraftmikroskopie sowie der Transmissionselektronenmikroskopie untersucht. …
-
Organische Photonische-Kristall-Laser
… werden hergestellt, indem eine dünne Schicht eines organischen Farbstoffs auf ein mikrostrukturiertes Plastiksubstrat aufgebracht wird. Die Lasertätigkeit in solchen Systemen beruht auf verteilter Rückkopplung, die vom Substrat verursacht wird. Die Substrate werden durch …
-
Polare Stratosphärenwolken : In-situ Untersuchungen mit einem Aerosolmassenspektrometer
… eine zentrale Rolle bei der Zerstörung der Ozonschicht. Heterogene Reaktionen auf diesen Partikeln wandeln Halogene aus vornehmlich anthropogenem Ursprung von relativ inerten Reservoirverbindungen in eine aktive Form um, die Ozon effizient zerstört. Das Wissen über diese Partikel hat sich …
-
Anomalous Small Angle X-ray Scattering (ASAXS) analysis of nanocrystals in glass ceramics: structure and composition
… nach. Diese Nanopartikel sind durch eine dünne Schicht die mit SiO2 angereichert ist umgeben. Ferner wird das Verhältnis von Fe- zu Mn-Atomen in den nanometergroßen Kristallen durch ASAXS bestimmt. Die Untersuchungen zeigen, dass sich die Kristallstruktur ändert und die Zusammensetzung …
-
Herstellung von Chitosan und einige Anwendungen
… durch Ausfällung aufgebrachtes Chitosan eine dünne Schicht auf den Cellulose-Fasern bildet. Die netzartige Struktur erleichtert die Bioabbaubarkeit, während die Schichtstruktur diese erschwert. 6. Die guten mechanischen Eigenschaften, die geringe Wasseraufnahmefähigkeit und die mit Cellulose …
-
Mechanical stresses upon phase transitions
Mechanical stress studies were carried out on three different groups of functional coatings using a purpose-built system. Functional coatings have become increasingly important in recent years due to their interesting technological applications. In this work three different groups of coatings were …
-
Spin-Bahn-Kopplung und zweidimensionale Zustände in ultradünnen, magnetischen Schichten
The aim of this thesis has been to determine the electronic structure atinterfaces between ferromagnetic and paramagnetic layers, in paramagneticoverlayers on ferromagnetic substrates, and of ferromagnetic bulk-likelayers itself. Especially, in these layer systems we were interested inhow the …
-
Ferroelektrische Eigenschaften von Kondensatoren mit epitaktischen BaTiO3-Dünnschichten
Abstract Epitaxial BaTiO3 films are interesting for the integration into microelectronics due to the ferroelectric properties and high permittivity. In this work epitaxial BaTiO3 thin-films were grown on conductive layers, SrRuO3 und La2/3Ca1/3MnO3, by pulsed laser deposition. The growth on …
-
Process property relations in reactively sputtered transition metal compounds
In the current thesis the relations between the process parameters and the properties of transition metal compound thin films grown by reactive magnetron sputtering techniques are investigated. In the first part, the effect of energetic species, which are generated by backscattering of plasma ions …
-
Herstellung von dünnen Elektrolytschichten mittels Laserablation und Kathodenzerstäubung für Hochtemperatur-Brennstoffzellen
Solid oxide fuel cells (SOFCs) are presently operated at temperatures between 800 and 1000°C. Lowering the operation temperature to 600°C at unchanged power density would increase the durability of the fuel cell stack. Alternative electrolyte materials with a higher electric conductivity and …
-
Phase change optical recording - preparation and X-ray characterization of GeSbTe and AgInSbTe films
The rapidly increasing net amount of digital information requires higher data- storage capacities and transfer rates. As a consequence, there is a need for a continuous improvement of the media concept and design. Phase change recording technology offers attractive features for erasable data …
-
Dynamics and manipulation of surface states
The properties of two-dimensional (2D) electronic states located at the surface of the (111) faces of the noble metals Ag, Cu, andAu as well as 2D overlayer states of single atom layer Sodium films on Cu(111) have been investigated using scanning tunnelingspectroscopy (STS). All measurements were …
-
Untersuchungen zu den Versagensmechanismen von Wärmedämmschicht-Systemen im Temperaturbereich von 900 C bis 1050 C bei zyklischer Temperaturbelastung
The present work examines the failure mechanisms of TBC-coated systems during cyclic temperature exposure without additional mechanical load in the temperature range between 900°C and 1050°C. If failure appeared until an testing duration of 5000h in the temperature range between 900°C and 950°C, it …
-
Untersuchung der Relaxation elastischer Spannungen durch Helium-Implantation und thermische Behandlung in Si 1-x Ge x / Si-Heterostrukturen
The present work is investigating the relaxation of elastic stresses in Si1-xGex/Si-heterostructures after helium implantation and thermal annealing. Particular attention is directed onto the interplay of helium diffusion and the nucleation and movement of dislocation loops leading to the …
-
Combinatorial material synthesis applied to Ge-Sb-Te based phase change materials
The rapidly increasing net amount of digital information requires higher data- storage capacities and transfer rates. Consequently, there is a need for a continuous improvement of the media concept and design. Phase change recording technology offers attractive features for erasable data storage …
-
Integration eines funktionell gradierten W/Cu-Übergangs für Divertorkomponenten von Fusionsanlagen
One of the most difficult topics in the design and development of future fusion devices, e.g. ITER (Latin for "the way") is the field of plasma facing components for the divertor. In steady-state mode these will be exposed to heat fluxes up to 20 MW/m2. The favored design-option is a component made …
-
Abscheidung und Charakterisierung von PECVD-Aluminiumoxidschichten
Nowadays, thin films are used widely to increase the life-time of the tooling surfaces. Alumina coatings are known to exhibit advantageous mechanical properties as well as chemical inertness and oxidation resistance at high temperatures. Hence, this material is a suitable candidate for coatings …
Page 1 of 2