Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 29 for “"Bare metal"”.
-
Pickling of steel
… this investigation. 1. The rate of attack on the bare metal increases with increasing temperature; particularly in the pickling of black stovepipes steel in 18.3 percent sulfuric acid solution where the rate of attack on the bare metal at 75°F is 0.097 milligrams per square inch per minute, while …
-
G.E.R.T : a go-based toolkit for embedded applications
… for SOCs are still largely written in either bare-metal C or userspace C because high-level languages running in userspace can have too much latency. This thesis proposes a new system called G.E.R.T, the Golang Embedded Run-Time, for multi-core ARM processors. GERT is a modified version of the …
-
Scuffing of Aluminum/steel Contacts Under Dry Sliding Conditions
… and finally cold welding due to adhesion between bare metal surfaces.
-
A system for impedance characterization of coronary stents
… values were recorded from stainless steel wires, bare metal and drug-eluting stents in an in vitro experimental set up, where the stent itself acted as an electrode. The effects of temperature, magnetic agitation, medium, time and various different stent types on impedance were evaluated. It was …
-
Holistic security 4.0
… Internet of Everything (IoE). The application of bare metal and logical technology qualities are put under the microscope to provide an effective blue print of the technological field. The systems and governance surrounding smart systems are also examined. Such an approach helps to explain the …
-
UniNet: accelerating the container network data plane in IaaS clouds
… IaaS environments. While it operates on either bare-metal servers or VMs, users prefer VMs for cost savings and agility reasons despite the added network overhead. This overhead, stemming from dual network tunneling at the VM and container levels, degrades performance. To address this, we …
-
Application Of In Vivo Flow Profiling To Stented Human Coronary Arteri
… patients after being treated separately with bare metal stents (BMS) and Sirolimus Eluting Stents (SES). The stent assignments were blinded until the end of the study. The study was repeated for the patients after 9 months. The predicted WSS ranged from (0.1- 8 N/m2) and was categorized into …
-
Latent Fingerprint Enhancement on a Brass Metal Surface using Paint Electrodeposition
… methods of enhancing fingerprints from metallic surfaces. Despite the success of cyanoacrylate fuming, fingerprint recovery on fired cartridge casings is rarely successful. Therefore, a new fingerprint development method is needed to enhance fingerprint evidence that may still be present …
-
Towards effective live cloud migration on public cloud IaaS.
… both stages of the approach on Packet bare metal cloud. To sum up, the thesis introduces a live cloud migration approach that is systematically designed and evaluated on uncontrolled environments, Amazon and Packet bare metal. In contrast to other approaches, it clearly highlights how …
-
Construction of nano-assembled microcapsules embedded with gold nanoparticles for use in novel drug delivery systems
… coronary artery diseases are managed. Although bare-metal stents can be traced back to 1994, long term efficacy of these stents has been shattered by ISR (In-Stent restenosis) and late stent thrombosis. Research on finding a solution to these issues has led to the development of DESs (Drug …
-
A Study of Dew Harvesting and Freezing Performance of Non-Wetting Surfaces
… surfaces offer enhanced capabilities over bare metal substrates for condensation with or without phase change. This trait can be utilized to broaden strategies in combating water scarcity in water stressed areas. Slippery lubricant infused surfaces have the ability to shed water droplets …
-
Environmentally friendly, rare earth-based inhibitors in conversion coatings and paint for the corrosion protection of aluminum alloys
… film normally deposited directly on the bare metal surface. The other types of coatings, generically referred to as paints, include primers which are applied over a conversion coating. A primer consists of a binder, usually organic, and pigments, which are mostly inorganic particles …
-
A Task-based Programming Methodology Using MCA Standards for Multicore Systems
… on top of multiple operating systems or even bare metal. MTAPI can also work as a translation layer for higher-level programming models. We follow the MTAPI specification and design and implement an MTAPI Runtime Library (RTL). Our evaluation platforms are a multicore x86-64 computing node and …
-
Inference of Kolmogorov-Arnold Networks on FPGA-based SoC
… ARM Cortex-A9 στον οποίο θα εκτελεστεί μία bare-metal εφαρμογή που θα ρυθμίζει τις παραμέτρους και θα κατευθύνει τις ροές δεδομένων προς το FPGA, μέσω Direct Memory Access (DMA) και memory-mapped περιφερειακά. Στόχος είναι ο μέγιστος συγχρονισμός του υλισμικoύ με την εφαρμογή λογισμικού ώστε …
-
Lamination of Inverted Organic Photovoltaics and Associated Physical Properties
… into inverted devices without lamination. Then bare metal contacts are pretreated and laminated into devices in order to investigate the mechanisms for time evolution in inverted devices. Finally, two active layers are laminated to make a tandem device. It is shown that the performance of the …
-
Quantifying the adhesion of noble metal foulants on structural materials in a Molten Salt Reactor
… Coalescing in the primary fluid, these noble metals then migrate and eventually deposit on internal reactor surfaces. Since the bulk of these noble metal fission products are also energetically unstable they bring not only physical fouling, but heat and radiation from decay as well. The …
-
Clinical, Invasive and Non-Invasive Factors Affecting Outcomes in Patients with Acute Coronary Syndromes
… 2075 patients undergoing PCI (29% ≥1 DES and 71% bare metal stent [BMS]); there were no differences between-group (e.g. target vessel revascularization (TVR) rates were 4.9% DES, 6.1% BMS; p=0.288), except for definite stent thrombosis (2% DES, 0.6% BMS; p= 0.002). Selective use criteria for DES …
-
Experimental studies of the electrothermal instability using electrically thick, coated metal
… in the thermal and hydrodynamic uniformity of metallic systems carrying electrical current densities greater than approximately 1 MA/mm^2. Most importantly, the stratified form of the ETI generates and amplifies temperature and subsequently density perturbations perpendicular to the current. …
-
Reducing interferences in glow discharge spectroscopies using transient operation and collision -induced dissociation
… to be possible while simultaneously trapping bare metal ions at the same nominal mass. These findings could eventually lead to the ability to acquire purely elemental mass spectra with minimal operator intervention.
-
Bioactive surfaces for improved coronary stent performance
… polypyrrole coatings can be deposited onto metal surfaces through electropolymerisation, a process that may be superior to the spray coating techniques commonly used by stent manufacturers. However, the full potential of this approach for use in stent coatings remains to be determined. An …
Page 1 of 2