Electrical, Magnetic, Thermal Modeling and Analysis of a 5000A Solid-State Switch Module and Its Application as a DC Circuit Breaker

This dissertation presents a systematic design and demonstration of a novel solid-state DC circuit breaker. The mechanical circuit breaker is widely used in power systems to protect industrial equipment during fault or abnormal conditions. Compared with the slow and high-maintenance mechanical circuit breaker, the solid-state circuit breaker is capable of high-speed interruption of high currents without generating an arc, hence it is maintenance-free. Both the switch and the tripping unit are solid-state, which meet the requirements of precise protection and high reliability. The major challenge in developing and adopting a solid-state circuit breaker has been the lack of power semiconductor switches that have adequate current-carrying capability and interruption capability. The high-speed, high-current solid-state DC circuit breaker proposed and demonstrated here uses a newly-emerging power semiconductor switch, the emitter turn-off (ETO) thyristor as the main interruption switch. In order to meet the requirement of being a high-current circuit breaker, ETO parallel operation is needed. Therefore the major effort of this dissertation is dedicated to the development of a high-current (5000A) DC switch module that utilizes multiple ETOs in parallel. This work can also be used to develop an AC switch module by changing the asymmetrical ETOs used to symmetrical ETOs. An accurate device model of the ETO is needed for the development of the high-current DC switch module. In this dissertation a novel physics-base lumped charge model is developed for the ETO thyristor for the first time. This model is verified experimentally and used for the research and development of the emitter turn-off (ETO) thyristor as well as the DC switch module discussed in this dissertation. With the aid of the developed device model, the device current sharing between paralleled multiple ETO thyristors is investigated. Current sharing is difficult to achieve for a thyristor-type device due to the large device parameter variations and strong positive feedback mechanism in a latched thyristor. The author proposes the "DirectETO" concept that directly benefits from the high-speed capability of the ETO and strong thermal couplings among ETOs. A high-current DC switch module based on the DirectETO can be realized by directly connecting ETOs in parallel without the bulky current sharing inductors used in other current-sharing solutions. In order to achieve voltage stress suppression under high current conditions, the parasitic parameters, especially parasitic inductance in a high-current ETO switch module are studied. The Partial Element Equivalent Circuit (PEEC) method is used to extract the parasitics. Combined with the developed device model, the electrical interactions among multiple ETOs are investigated which results in structural modification for the solid-state DC switch module. The electro-thermal model of the DC switch module and the heatsink subsystem is used to identify the "thermal runaway" phenomenon in the module that is caused by the negative temperature coefficient of the ETO's conduction drop. The comparative study of the electro-thermal coupling identifies a strongly-coupled thermal network that increases the stability of the thermal subsystem. The electro-thermal model is also used to calculate the DC and transient thermal limit of the DC switch module. The high-current (5000A) DC switch module coupled with a solid state tripping unit is successfully applied as a high-speed, high-current solid-state DC circuit breaker. The experimental demonstration of a 5000A current interruption shows an interruption time of about 5 microseconds. This high-speed, high-current DC switch module can therefore be used in DC circuit breaker applications as well as other types of application, such as AC circuit breakers, transfer switches and fault current limiters. Since the novel solid-state DC circuit breaker is able to extinguish the fault current even before it reaches an uncontrollable level, this feature provides a fast-acting, current-limiting protection scheme for power systems that is not possible with traditional circuit breakers. The potential impact on the power system is also discussed in this dissertation.

Name thesis:degree_name

Ph. D.

Level thesis:degree_level

doctoral

Discipline thesis:degree_discipline

Electrical and Computer Engineering

Department dc:contributor.department

Electrical and Computer Engineering

Grantor dc:publisher

Virginia Tech

Year dc:date.issued

2005

Author dc:creator

• Zhou, Xigen

Chairs dc:contributor.committeechair

• Huang, Alex Q.
• Wang, Fei Fred

Committee members dc:contributor.committeemember

• Liu, Yilu
• Nelson, Douglas J.
• Lai, Jih-Sheng
• Van Wyk, Daan

• Solid-State Circuit Breaker
• Emitter Turn-Off Thyristor (ETO)
• Parallel Operation
• Circuit Breaker
• DC Distribution
• DC Switch
• Integrated Power Electronics Module (IPEM)

Statement dc:rights

• In Copyright

Licence dc:rights.uri

• http://rightsstatements.org/vocab/InC/1.0/

Dc Identifier Other

etd-09082005-025753

OAI identifier oai:identifier

oai:vtechworks.lib.vt.edu:10919/28900