Back to search

Virginia Polytechnic Institute

A direct current differential relay

Abstract

dc:description.abstract

In a grounded direct current system, motor faults may occur which will not be indicated by ordinary protective devices, but which will affect motor operation or create unsafe conditions. All such faults are manifested by the fact that the current in one lead supplying the motor will be greater than that in the other. This current differential can be made to operate a direct current differential relay. About the two supplying leads, when such a fault occurs, will exist a magnetomotive force. This mmf will set up a flux in the core and armature of a relay which forms a magnetic circuit about the supplying conductors. Since the armature of the relay is balanced on a knife edge, the force of attraction between core and armature which is caused by the flux passing from one to the other will move the armature, and in so doing close a pair of contacts. A model relay was built which operates on this principle. Testing demonstrated that it would operate on a differential of approximately one and one-half amperes and that the relay would release when the differential was reduced to approximately four-tenths amperes. The test also showed that these differentials did not vary when the total currents involved changed. These results indicate that a relay built with a slightly different design, (so as to overcome the shortcomings of test model, notably the insecure armature mounting, and so as to provide certain other features, such as control of the current differential for which the relay will operate), would be responsive to current differentials of less than one-half ampere. Such a relay would be a practical device and would be capable of performing, in conjunction with a second, conventional, relay and a circuit breaker, an important control function.

Degree

thesis:*
Name thesis:degree_name
M.S.
Level thesis:degree_level
masters
Discipline thesis:degree_discipline
Electrical Engineering
Department dc:contributor.department
Electrical Engineering
Grantor dc:publisher
Virginia Polytechnic Institute
Year dc:date.issued
1948

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Parsons, Roger Loren

Rights

dc:rights
Statement dc:rights
  • In Copyright
Language dc:language.iso
en

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/10919/106533
OAI identifier oai:identifier
oai:vtechworks.lib.vt.edu:10919/106533

Chain of custody

source
Harvested from
Virginia Tech
Base URL
vtechworks.lib.vt.edu/oai/request
Last updated
2026-07-22
Source record
OAI-PMH GetRecord
related terms
citation

Parsons, Roger Loren. A direct current differential relay. masters thesis, Virginia Polytechnic Institute, 1948. http://hdl.handle.net/10919/106533