Back to search

South Dakota State University

Thermo-Chemical Conversion of Lignocellulosic Biomass to Liquid Biofuels

Abstract

dc:description.abstract

<p>The thermo-chemical conversion of biomass to hydrocarbons has been investigated for decades as an alternative to using petroleum-derived fuels. Equipment and feedstock have improved, but, biomass conversion efficiency and bio-oil quality still remain challenges. This study aims to investigate the conversion paths of biomass to raw bio-oil and raw bio-oil to upgraded fungible biofuels. The goal is to design and evaluate the new paths and reactors on biomass conversion and bio-oil upgrading. A proprietary fast pyrolysis reactor was used to carry out the study of thermo-chemical conversion of lignocellulosic biomass to raw bio-oil. This reactor converted biomass to bio-oil at a rate of 1 to 2 kilograms per hour. Corn stover and pine sawdust were the feedstocks used for this study. The bio-oil produced was also characterized. Bio-oil produced from pine sawdust had better qualities than that produced from corn stover in moisture content (47.04 wt % versus 54.88 wt %), energy content (13.81 MJ/kg versus 10.19 MJ/kg), and viscosity (9.8 cP versus 3.2 cP). Upgrading the aqueous fraction of raw bio-oil (light bio-oil) was performed using a high pressure fixed-bed reactor (HPF). Catalysts and process conditions were varied and compared. The upgraded light bio-oil had a carbon content of ~ 80 wt %, and an oxygen content of ~ 9 wt %. Heavy bio-oil fraction (viscosity greater than 5000 cP) was upgraded using an autoclave. Catalyst Ru/AC and HZSM-5 were used as catalyst. Process condition named H250+C400 (Hydrotreating at 250°C for 4 hours than instantly cracking at 400°C for 1~2 minutes) was observed the most effective for the heavy bio-oil upgrading. Viscosity of the upgraded heavy bio-oil was reduced from 8710 cP to 70 cP, and the oxygen content decreased from 33.90 wt % to 9.48 wt %. Upgraded heavy bio-oil’s properties were improved significantly and can be easily further refined to fungible drop-in fuels.</p>

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis - University Access Only
Discipline thesis:degree_discipline
Agricultural and Biosystems Engineering
Year dc:date.available
2014

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Qu, Wangda
Contributors dc:contributor
  • Lin Wei

Subjects

dc:subject × 1

Rights

dc:rights
Statement dc:rights
  • <p>In Copyright - Non-Commercial Use Permitted<br /><a href="http://rightsstatements.org/vocab/InC-NC/1.0/">http://rightsstatements.org/vocab/InC-NC/1.0/</a></p>
Language dc:language
en

Identifiers

dc:identifier.*
Repository record dc:identifier
https://openprairie.sdstate.edu/etd/1578
OAI identifier oai:identifier
oai:openprairie.sdstate.edu:etd-2585

Chain of custody

source
Harvested from
South Dakota State University
Base URL
openprairie.sdstate.edu/do/oai/
Last updated
2026-07-24
Source record
OAI-PMH GetRecord
citation

Qu, Wangda. Thermo-Chemical Conversion of Lignocellulosic Biomass to Liquid Biofuels. Thesis - University Access Only thesis, 2014. https://openprairie.sdstate.edu/etd/1578