Transmission Electron Microscopy Preparation and Characterization of Bulk ZnO and Au(111) / ZnO(000-1) Heterostructures

Several preparation techniques were investigated, including (a) dimpling and ion milling, (b) hand-held tripod polishing and (c) automatic tripod polishing, to prepare electron transparent samples of ZnO suitable for transmission electron microscopy (TEM). Thinned ZnO became prone to cracking below a thickness of ~20 microns during the use of each of these techniques. The extension of cracks, supposedly generated at micropores, was believed to be the cause of the brittle behavior of the material. A repeat dimple process was introduced to ameliorate this problem. In this procedure, the sample was dimpled while it is >200 microns, polished from the backside and then redimpled with a felt-polishing wheel. Ion milling with a low beam current (2-4), a low angle (8°-13°) and the use of a liquid nitrogen cold stage to reduce ion mill damage was subsequently employed. The investigation of an additional technique namely, focused ion beam thinning, generated high densities of defects in the ZnO that were extrinsic to the material and which prevented TEM studies of these samples. Micrographs of ZnO produced by the repeat dimple procedure confirmed the presence of dislocations and stacking faults in the material. TEM studies of gold contacts on the ZnO wafers confirmed epitaxial growth of the former and the delamination of the contacts during cooling from annealing in air at 175 degrees for 15 minutes.

Author dc:creator

• Kiesel, Sharon Mary

Advisors dc:contributor.advisor

• Dr. Robert F. Davis, Committee Chair
• Dr. N. A. El-Masry, Committee Member
• Dr. Salah Bedair, Committee Member

• gold contacts
• TEM sample preparation
• TEM
• ZnO

Statement dc:rights

• I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to NC State University or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report.

Dc Identifier Other

etd-11242003-211411

OAI record oai:identifier

https://repository.lib.ncsu.edu/server/oai/request?verb=GetRecord&metadataPrefix=dim&identifier=oai%3Arepository.lib.ncsu.edu%3A1840.16%2F2820