Back to search

Massachusetts Institute of Technology

Analysis and design of an in-pipe system for water leak detection

Abstract

dc:description.abstract

Leaks are a major factor for unaccounted water losses in almost every water distribution network. Pipeline leak may result, for example, from bad workmanship or from any destructive cause, due to sudden changes of pressure, corrosion, cracks, defects in pipes or lack of maintenance. The problem of leak becomes even more serious when it is concerned with the vital supply of fresh water to the community. In addition to waste of resources, contaminants may infiltrate into the water supply. The possibility of environmental health disasters due to delay in detection of water pipeline leaks have spurred research into the development of methods for pipeline leak and contamination detection. This thesis is on the analysis and design of a floating mobile sensor for leak detection in water distribution pipes. This work covers the study of two modules, namely a "floating body" along with its "sensing module". The Mobility Module or the floating body was carefully studied and designed using advanced CFD techniques to make the body as non-invasive to the flow as possible and to avoid signal corruption. In addition, experiments were carried out to investigate the effectiveness of using in-pipe measurements for leak detection in plastic pipes. Specifically, acoustic signals due to simulated leaks were measured and studied for designing a detection system to be deployed inside water networks of 100mm pipe size.

Degree

thesis:*
Department dc:contributor.department
Massachusetts Institute of Technology. Dept. of Mechanical Engineering.
Grantor dc:publisher
Massachusetts Institute of Technology
Year dc:date.issued
2010

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Chatzigeorgiou, Dimitris M
Advisor dc:contributor.advisor
  • Kamal Youcef-Toumi.

Subjects

dc:subject × 1

Rights

dc:rights
Statement dc:rights
  • M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
Language dc:language.iso
eng

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/1721.1/62529
OAI identifier oai:identifier
oai:dspace.mit.edu:1721.1/62529

Chain of custody

source
Harvested from
MIT
Base URL
dspace.mit.edu/oai/request
Last updated
2026-07-22
Source record
OAI-PMH GetRecord
citation

Chatzigeorgiou, Dimitris M. Analysis and design of an in-pipe system for water leak detection. Massachusetts Institute of Technology, 2010. http://hdl.handle.net/1721.1/62529