Back to search

Massachusetts Institute of Technology

Fluid mechanics of bubble capture by the diving bell spider

Abstract

dc:description.abstract

The water spider, a unique member of its species, is used as inspiration for a bubble capture mechanism. Bubble mechanics are studied in the pursuit of a biomimetic solution for transporting air bubbles underwater. Careful experimentation is performed to understand the mechanics of bubble formation and capture. Investigation of bubble formation through an underwater nozzle shows that bubble volume increases by 15% when parallel rods are spaced above the nozzle at the same width as the inner diameter of the nozzle. Bubble volume decreases linearly with increasing air injection rate. Decreasing surface tension by approximately 40% decreases bubble volume by approximately 20%. Changing the angle the nozzle from parallel to perpendicular with the bottom of the tank increases bubble volume 40%. Based on trends observed in the nozzle experiments and using the spider's mechanisms for bubble capture as inspiration, a bubble capture device is manufactured. Decreasing the surface tension of the fluid by 25% decreases captured bubble volume by 50%. Below a device submersion speed of approximately 2.4 mm/s, bubble formation was at a maximum for the device, regardless of fluid surface tension. This research elucidates the limitations on bubble capture by the water spider. For future applications, these limitations can be pinpointed and adjusted for more efficient bubble capture and plastron maintenance.

Degree

thesis:*
Department dc:contributor.department
Massachusetts Institute of Technology. Dept. of Mechanical Engineering.
Grantor dc:publisher
Massachusetts Institute of Technology
Year dc:date.issued
2010

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Brooks, Alice (Alice P.)
Advisor dc:contributor.advisor
  • Dick K.P. Yue.

Subjects

dc:subject × 1

Rights

dc:rights
Statement dc:rights
  • M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
Language dc:language.iso
eng

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/1721.1/59898
OAI identifier oai:identifier
oai:dspace.mit.edu:1721.1/59898

Chain of custody

source
Harvested from
MIT
Base URL
dspace.mit.edu/oai/request
Last updated
2026-07-22
Source record
OAI-PMH GetRecord
citation

Brooks, Alice (Alice P.). Fluid mechanics of bubble capture by the diving bell spider. Massachusetts Institute of Technology, 2010. http://hdl.handle.net/1721.1/59898