Back to search

Massachusetts Institute of Technology

A MEMS-based, high-resolution Electric-Field meter

Abstract

dc:description.abstract

In MEMS-based inertial sensors, such as accelerometers and gyroscopes, known electrical waveforms are applied to a modulating capacitive element to determine an unknown deflection. However, the inverse of this scheme can also be exploited - the capacitive element can be deterministically modulated to measure an electrostatic variable. This thesis presents the design, analysis, and evaluation of such a sensor -a MEMS-based, high-resolution electrostatic field-meter (ESF) - using the Analog Devices iMEMS process. High-resolution sensing is achieved by optimizing the interface electronics for low-noise operation and applying feedback techniques to enhance the range-of-motion of the MEMS capacitive structure. The entire system consists of three components: the MEMS capacitive structure and two circuit subsystems - the sense block and the drive loop. The MEMS structure acts as a transducer to generate a dynamic current that is proportional to the magnitude and polarity of the electric field incident on the sensor. The drive loop is a closed feedback loop that modulates the MEMS capacitive structure at its resonant frequency to maximize its displacement and the magnitude of the dynamic current. The sense block ultimately converts the dynamic current into a dc voltage that is proportional to the magnitude and polarity of the incident electric field. The critical, front-end component of the sense block, a transimpedance amplifier, is implemented with a low-noise operational amplifier for optimum sensing resolution.

Degree

thesis:*
Department dc:contributor.department
Massachusetts Institute of Technology. Dept. of Electrical Engineering and Computer Science.
Grantor dc:publisher
Massachusetts Institute of Technology
Year dc:date.issued
2005

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Shafran, John Sawa
Advisor dc:contributor.advisor
  • Kent H. Lundberg, Timothy A. Denison and Michael W. Judy.

Subjects

dc:subject × 1

Rights

dc:rights
Statement dc:rights
  • M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission.
Language dc:language.iso
eng

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/1721.1/33358
OAI identifier oai:identifier
oai:dspace.mit.edu:1721.1/33358

Chain of custody

source
Harvested from
MIT
Base URL
dspace.mit.edu/oai/request
Last updated
2026-07-22
Source record
OAI-PMH GetRecord
citation

Shafran, John Sawa. A MEMS-based, high-resolution Electric-Field meter. Massachusetts Institute of Technology, 2005. http://hdl.handle.net/1721.1/33358