Continuous hydride generation in the presence of L- cysteine for the determination of arsenic, bismuth, antimony and tin in steels by inductively coupled plasma atomic emission spectrometry

Arsenic, bismuth, germanium, antimony and tin were simultaneously determined by continuous hydride generation and inductively coupled plasma-atomic emission spectrometry . I Hydrides were introduced into four different types of gas-liquid separators. Two of the gas-liquid separators were available in-house. A third was developed for this project and a fourth was based on a design used by CET AC. The best signal intensity was achieved by the type II frit-based gas-liquid separator, but the modified Cetac design gave promise for the future, due to low relative standard deviation. A method was developed for the determination of arsenic, bismuth, antimony and tin in low-alloy steels. Four standard reference materials from NIST were dissolved in 10 mL aqua regia without heat. Good agreement was obtained between experimental values and certified values for arsenic, bismuth, antimony and tin. The method was developed to provide the analyst with the opportunity to determine the analytes by using simple aqueous standards to prepare calibration lines. Within the limits of the samples analyzed, the method developed is independent of matrix.

Name thesis:degree_name

M.Sc. Chemistry

Level thesis:degree_level

Masters

Discipline thesis:degree_discipline

Faculty of Mathematics and Science

Department dc:contributor.department

Department of Chemistry

Grantor

Brock University

Year dc:date.issued

1998

Author dc:creator

• Chanvaivit, Sirirat.

• Hydrides.
• Inductively coupled plasma atomic emission spectrometry.
• Steel--Analysis.

Language dc:language.iso

eng

Handle dc:identifier.uri

http://hdl.handle.net/10464/1812

OAI identifier oai:identifier

oai:brocku.scholaris.ca:10464/1812